[firebirdjimbo]

ok ive been looking around for a while and i have seen every video there is on the promaster, and it looks like a very good gun especially for 100 bucks. but the gun doesnt come with a asa or macroline, and i was wondering if any asa would work and if i would need a macroline fitting for the reg too? and if you want can you put some links up of cheap asa's that would work thanks. heres a link of the gun.

http://cgi.ebay.com/Indian-Creek-Lasoya-Pr...5|39:1|240:1318

[slinkyaroo]

http://www.firstcall...ore/show/112960

Check out their website and get everything shipped together. They'll make deals on the phone. Offer them $100 with an ASA and macro fitting/line included.

.

[firebirdjimbo]

slinkyaroo, on Mar 15 2009, 08:43 AM, said:

http://www.firstcall...ore/show/112960

Check out their website and get everything shipped together. They'll make deals on the phone. Offer them $100 with an ASA and macro fitting/line included.

.

sounds good i will try thanks:)

[firebirdjimbo]

well there outta stock on the promaster and they have the lasoya promaster on ebay so i had no luck with first call. although there store on ebay has things that there website doesnt. weird.

[firebirdjimbo]

is this all i would need for the lasoya promaster to work? macroline and duckbill.


http://cgi.ebay.com/E-PAINTBALL-Macroline-...|39:1|240:1318l

http://cgi.ebay.com/NEW-32-Degrees-Duckbil...5|39:1|240:1318

[PbGoods]

firebirdjimbo, on Mar 15 2009, 05:37 PM, said:

is this all i would need for the lasoya promaster to work? macroline and duckbill.


http://cgi.ebay.com/E-PAINTBALL-Macroline-...|39:1|240:1318l

http://cgi.ebay.com/NEW-32-Degrees-Duckbil...5|39:1|240:1318

Yes, that is all you will need to get this up and running, but if you could I would definitely go for an On/Off ASA over the duck bill. However, the duck bill will get the job done if you are tight on money.

[Weigel21]

The marker SHOULD come with Macro line and fittings, but some companies jack them out of the box or something. My ProMaster came with both, so you may want to wait until it arrives before committing to purchasing more. Then, if it comes with both, you can use that extra $12 on an On/Off ASA. Also, you'll want to change out the feedneck to a clamping one most likely and just so you know, only CCM and AKA make Bushmaster threaded feednecks. Ion threaded feednecks are ever so slightly different and while they can work, you run the risk of messing up the threads on the marker.

[firebirdjimbo]

Weigel21, on Mar 15 2009, 10:49 PM, said:

The marker SHOULD come with Macro line and fittings, but some companies jack them out of the box or something. My ProMaster came with both, so you may want to wait until it arrives before committing to purchasing more. Then, if it comes with both, you can use that extra $12 on an On/Off ASA. Also, you'll want to change out the feedneck to a clamping one most likely and just so you know, only CCM and AKA make Bushmaster threaded feednecks. Ion threaded feednecks are ever so slightly different and while they can work, you run the risk of messing up the threads on the marker.

thanks for the super helpful info i will probably get the on/off asa, and might look into a new feedneck depending on if this one pisses me off or not.

[Logan98]

i have bought a promaster and a lasoya promaster they come with two 90 degree fittings and i foot of macroline and any asa with the two screw holes side by side will work this gun does not have a rail