This post has been edited by cocker addict: 09 February 2013 - 03:15 PM
Regulator swapping. Reg switch
Posted 09 February 2013 - 04:28 PM
Shooting it dry in my experience. You get some good practice in too. Another thing you can do is take your on off asa off your gun ( if you can), screw in your tank and then screw in the on off knob part way. You don't even need macro line and it can be very fast and loud or very slow and quiet, depending on how much u screw your asa in.
Posted 10 February 2013 - 10:28 AM
Played with a regulator that's just screwed in since 2008. I'd advice against using locktite, as if you need to take it of, it's a complete bitch to do and you might ruin your tank or regulator.
Posted 11 February 2013 - 01:28 PM
Posted 12 February 2013 - 09:56 AM
You have a high pressure tank, your gun operates at 550PSI, or so you say. Why would you want to lower the pressure in your tank ? The way it is set up now, you will always be able to operate your marker until the tank gets so low that it cannot fire the solenoid anymore. Why take the chance on misfires by trying to run at threshhold pressure ? That really doesn't make sense to me.
Posted 13 February 2013 - 11:41 AM