[Hebiki]

seriouslysilly, on 12 January 2013 - 07:38 AM, said:

My GT is affected by the dim OLED phenomena
already sent it in, I so miss it.

might as well get that sucker tuned and get some fitted o-rings

[syllabuz]

Hebiki, on 14 January 2013 - 05:33 PM, said:

might as well get that sucker tuned and get some fitted o-rings

a question about fitted orings Hebiki,
the said "fitted o-rings", are they normal o-rings hand fitted to the gun or quad/x rings?
thinking of x modding my droid. or at least putting polys in.

EDIT: thanks for listing me up!

This post has been edited by syllabuz: 14 January 2013 - 05:37 PM

[Hebiki]

syllabuz, on 14 January 2013 - 05:37 PM, said:

Hebiki, on 14 January 2013 - 05:33 PM, said:

might as well get that sucker tuned and get some fitted o-rings

a question about fitted orings Hebiki,
the said "fitted o-rings", are they normal o-rings hand fitted to the gun or quad/x rings?
thinking of x modding my droid. or at least putting polys in.

EDIT: thanks for listing me up!

contact Eric at eric@aggressivesports.net.

[seriouslysilly]

Hebiki, on 14 January 2013 - 05:33 PM, said:

seriouslysilly, on 12 January 2013 - 07:38 AM, said:

My GT is affected by the dim OLED phenomena
already sent it in, I so miss it.

might as well get that sucker tuned and get some fitted o-rings

LOL, sent it in last week for the screen. should be coming tomorrow.
Hopefully this will be it with the GT original part malfunction. Already sent it in 2x (noid, screen)
If I remember correctly, the replacement noid isn't the new one with the stronger coil.


Bought a bunch of viton and poly orings and put it in myself. So far so good with the orings

[akt22]

can anyone with a GT check this out for me?

Screw in a tank, gas it up and see if you can loosen the tank while it's still on w/o too much effort. My tank slightly unscrews from the asa if I slide a little too hard, so I want to make sure this isn't common to me

Edit: never mind, false alarm. I wasn't just screwing it in tight enough.

This post has been edited by akt22: 19 January 2013 - 03:05 PM

[Hebiki]

akt22, on 19 January 2013 - 02:46 PM, said:

can anyone with a GT check this out for me?

Screw in a tank, gas it up and see if you can loosen the tank while it's still on w/o too much effort. My tank slightly unscrews from the asa if I slide a little too hard, so I want to make sure this isn't common to me

Edit: never mind, false alarm. I wasn't just screwing it in tight enough.

[madsnipes]

random question here, what came first the clone (not the VX just the normal clone) or the droid.
I was just wondering

[SOUP]

Droid came first, in 2007 I believe.

Sonic autocockers, 05-07 borgs, droid, cyborg rx, clone, tactical drone, clone vx, Drone dx, clone GT.

The order is pretty close to that I believe. The vx may have came before the tactical drone, I don't remember too much about them so I figured it was between teh normal clone and the vx. Maybe someone else can clarify.

[Hebiki]

so quiet around these parts.....

[seriouslysilly]

Yup.... whatcha think about the new board?
Worth the upgrade if it's more than $50 + old board for it?

[Hebiki]

seriouslysilly, on 08 February 2013 - 09:24 PM, said:

Yup.... whatcha think about the new board?
Worth the upgrade if it's more than $50 + old board for it?

i would say so..... the fact that they're accepting trades is pretty awesome. full color OLED... real time pressure sensor.

the wait for the cyborg... now thats KILLING me.

[JGARRIGUES0001]

it's been a while. went and joined the military so i need an update. I hear there's a new board that senses the operating pressure for the GT??? how in the hell??? lol and im digging the spring mod, anybody have it yet?

[JGARRIGUES0001]

it's been a while. went and joined the military so i need an update. I hear there's a new board that senses the operating pressure for the GT??? how in the hell??? lol and im digging the spring mod, anybody have it yet?

[akt22]

just go in my thread in the news section. Has all the info about it.

[CptKaveman]

About to go ballin here in a minute

[JGARRIGUES0001]

akt22, on 24 February 2013 - 06:45 AM, said:

just go in my thread in the news section. Has all the info about it.

im totally confused now lol. there's a delrin solenoid? is that what they replaced all of the first batch solenoids with? or is it totally new?
and the new valve? should I wait to get my GT spring modded till after it comes out?

[akt22]

JGARRIGUES0001, on 24 February 2013 - 06:55 PM, said:

akt22, on 24 February 2013 - 06:45 AM, said:

just go in my thread in the news section. Has all the info about it.

im totally confused now lol. there's a delrin solenoid? is that what they replaced all of the first batch solenoids with? or is it totally new?
and the new valve? should I wait to get my GT spring modded till after it comes out?

new valve is pooty mod ready, so you just have to get the bolt fixed up as well as the spring.

Delrin solenoid is what they currently add in new batch of GT's, I think. Don't have confirmation for that.

[JGARRIGUES0001]

akt22, on 25 February 2013 - 06:57 AM, said:

JGARRIGUES0001, on 24 February 2013 - 06:55 PM, said:

akt22, on 24 February 2013 - 06:45 AM, said:

just go in my thread in the news section. Has all the info about it.

im totally confused now lol. there's a delrin solenoid? is that what they replaced all of the first batch solenoids with? or is it totally new?
and the new valve? should I wait to get my GT spring modded till after it comes out?

new valve is pooty mod ready, so you just have to get the bolt fixed up as well as the spring.

Delrin solenoid is what they currently add in new batch of GT's, I think. Don't have confirmation for that.

I had a bad noid, first batch marker, and got it replaced... i wonder if the delrin noid is what they put in it??? Do you know if there's any real advantage to the Delrin solenoid over... the "other" one lol

[akt22]

JGARRIGUES0001, on 25 February 2013 - 08:18 PM, said:

akt22, on 25 February 2013 - 06:57 AM, said:

JGARRIGUES0001, on 24 February 2013 - 06:55 PM, said:

akt22, on 24 February 2013 - 06:45 AM, said:

just go in my thread in the news section. Has all the info about it.

im totally confused now lol. there's a delrin solenoid? is that what they replaced all of the first batch solenoids with? or is it totally new?
and the new valve? should I wait to get my GT spring modded till after it comes out?

new valve is pooty mod ready, so you just have to get the bolt fixed up as well as the spring.

Delrin solenoid is what they currently add in new batch of GT's, I think. Don't have confirmation for that.

I had a bad noid, first batch marker, and got it replaced... i wonder if the delrin noid is what they put in it??? Do you know if there's any real advantage to the Delrin solenoid over... the "other" one lol

Some people say this is the new solenoid-Here.


Look at shootnpoo's pic, that's supposedly what comes out on the GT's currently. Part of the solenoid is replaced by delrin as well as a few internal changes.

Again info is scarce about the noid, with only a few unverified sources saying it's the one on the link above.

[NJC]

does anybody else have any problems with the stock Droid Regulator? mine is insanely inconsistent. like 290-190 FPS inconsistent