madsnipes, on 22 June 2011 - 09:17 AM, said:
i know this sounds stupid but that looks exactily like the VSS sniperskia special from Battlefield Bad Company 2
I can kind of see the resemblance- a short rail mounted mag, and a custom stock and it'd match up fine. If I had the mil-sim itch- I'd do it
SlovPeter, on 22 June 2011 - 03:03 PM, said:
Uv, I have my t9.1 and seem to be wanting to keep it. Do you use this marker at your local field as this would be my only one. Very nice paint job and mod. I want to do the same idea as yours, but in a multicam color if that is possible.
I would obviously need to buy the Rifled barrel and FSR,but I would rather have stock with the hpa in int instead of a one with a remote line. I really like the modification. I shot my first strike through it and my jaw hit the floor. I have hits at around 500 feet, which was astounding. It's kind of hard to go off what you say since, you don't want to give details for other purposes.
I'm going to try and get a mock up of how you did it. Also, how did you make the see through mag panel? You must have cut it and put plexi glass or something over it.
I use mine almost exclusively (I recently fired my first 1/2 case in over a year), at two local fields in my area. Duracoat sells a stencil and paint combo for a something very close (in not the same) as the multicam pattern.
The tank in stock is a great idea for some fields or games I play at. But, for consistency in my load-out, I use the same gear, year round.
The mag/ammo window, is a relatively easy mod- it just takes time, and patience. Basically, you cut a slot in the grip. The edges of this slot bevel in, and downwards. You cut a piece of thin acrylic (I cut a piece from a cheap all-acrylic picture frame I found in target), and bevel it so that it fits and rests in the slot. Then, you use the appropriate plastic glue of your choice to hold it in.