TechPB
Help
My proto SLG is not shooting every time I pull the trigger. It's one in 3 or so. sometimes it wont shoot at all unless i let it sit for a few minutes but other times it will shoot perfect. Anybody got any ideas as to what could be the issue?
What ive done - new battery, changed the board settings, lubed and replaced o-rings, Thanks
Page 1 of 1
Proto Slg Help
#1
recreationalpb 
- Member Title
-
- Group: Members
- Posts: 131
- Joined: 16-November 12
- Gender:Male
Posted 30 November 2012 - 10:42 PM
#2
kingJurzy
- TechPB's best member 2012
-
- Group: Members
- Posts: 7,703
- Joined: 04-January 12
- Gender:Male
- Location:Bay Area, California
-
Posted 30 November 2012 - 10:53 PM
mess with the trigger activation, if not look at the microswitch.
Lime, on 04 May 2013 - 08:45 PM, said:
Dude, I wouldn't pay anymore than tree fiddy for a kingjurzy.
FEEDBACK: 20/0/0
#3
recreationalpb
- Member Title
-
- Group: Members
- Posts: 131
- Joined: 16-November 12
- Gender:Male
Posted 30 November 2012 - 11:22 PM
kingJurzy, on 30 November 2012 - 10:53 PM, said:
mess with the trigger activation, if not look at the microswitch.
The microswitch trips every trigger pull but the gun does not fire.
#4
TooTallNiCo
- Senior Member
-
- Group: Members
- Posts: 1,550
- Joined: 27-September 11
- Gender:Male
- Location:Pleasant Prairie, WI
Posted 30 November 2012 - 11:34 PM
could possibly be the SLG blues.
#5
PrimeTimePred
- Sophomore Member
-
- Group: Members
- Posts: 306
- Joined: 22-November 12
- Gender:Male
- Location:Tallahassee, FL
Posted 01 December 2012 - 12:06 AM
There is no "help" for an SLG... (Sorry couldnt help myself)
#6
chi-townSniper
- Senior Member
-
- Group: Members
- Posts: 1,203
- Joined: 15-March 10
- Gender:Male
- Location:chicago IL
Posted 01 December 2012 - 03:38 AM
Clean your eyes and change the detents. Change all of the Orings on the Bolt and lube the hole thing up. I had a lot of problems with my slg way back when that pissed me off so much. I really hope this works out cuz I know tht shitty feeling, trust me.
Edit: Also, when mine did this, I noticed the bolt would pause halfway back from the feedneck for a slight moment and stop a new ball from loading. This could be your problem. I dont know how to fix that exactly but test that out to see if its the problem.
Edit: Also, when mine did this, I noticed the bolt would pause halfway back from the feedneck for a slight moment and stop a new ball from loading. This could be your problem. I dont know how to fix that exactly but test that out to see if its the problem.
This post has been edited by chi-townSniper: 01 December 2012 - 03:40 AM
Share this topic:
Page 1 of 1