TechPB
Help
hey so I just got the empire sniper but the trigger is acting weird. I'll go to pull the trigger and it won't let me pull it. At first I thought that maybe I wasn't pulling the trigger hard enough but it didn't make a difference. anybody else have this problem? how can i fix it?
Page 1 of 1
empire sniper pump problems
#1
condowarren 
- Member
-
- Group: Members
- Posts: 50
- Joined: 10-February 13
- Gender:Male
- Location:Canada
-
Posted 17 March 2013 - 06:08 PM
#2
Vidalecent
- Low-end Lover
-
- Group: Members
- Posts: 166
- Joined: 11-December 12
- Gender:Male
Posted 17 March 2013 - 07:08 PM
Is the safety on?
#3
condowarren
- Member
-
- Group: Members
- Posts: 50
- Joined: 10-February 13
- Gender:Male
- Location:Canada
-
Posted 17 March 2013 - 07:31 PM
no the safty is not on.... im not a retard
#4
XxJellyFilledxX
- dat fity snake
-
- Group: Members
- Posts: 3,259
- Joined: 23-September 11
- Gender:Male
- Location:Megaton
Posted 17 March 2013 - 09:39 PM
call kee
spqr-king, on 17 March 2013 - 08:03 AM, said:
People call me Kobe Bryant... cuz I rape bitches...
#5
Vidalecent
- Low-end Lover
-
- Group: Members
- Posts: 166
- Joined: 11-December 12
- Gender:Male
Posted 17 March 2013 - 11:01 PM
condowarren, on 17 March 2013 - 07:31 PM, said:
no the safty is not on.... im not a retard
I never called you one. No need to get snarky. Sorry for trying to help, buddy.
On a side note:
This post has been edited by Vidalecent: 17 March 2013 - 11:10 PM
#6
bassfisher
- Senior Member
-
- Group: Members
- Posts: 1,384
- Joined: 16-November 12
Posted 18 March 2013 - 12:24 AM
Have you tried the hammer lug? Try adjusting that, it might be that it is too far down and not letting the seer release all the way.
Carolina Riot Scenario Team
#7
Fapner
- Newbie
-
- Group: Members
- Posts: 28
- Joined: 20-November 12
Posted 18 March 2013 - 12:34 AM
Take the auto trigger off, below the arm it is being screwed into a piece that goed through the handle. flip it around (and play with the arm with the screw off until when the pump handle is forward with the auto trigger on you can slightly pull the trigger.) I had the same problem when i first took apart my sniper.
If that screw is the wrong way it will act as if the safety is on. The screw can only go one way or the other, just turn it clockwise or counter a 180 degree turn and put it back together.
If that screw is the wrong way it will act as if the safety is on. The screw can only go one way or the other, just turn it clockwise or counter a 180 degree turn and put it back together.
This post has been edited by Fapner: 18 March 2013 - 12:36 AM
#8
natezthekid
- Member
-
- Group: Members
- Posts: 66
- Joined: 26-June 11
Posted 18 March 2013 - 09:45 AM
Fapner, on 18 March 2013 - 12:34 AM, said:
Take the auto trigger off, below the arm it is being screwed into a piece that goed through the handle. flip it around (and play with the arm with the screw off until when the pump handle is forward with the auto trigger on you can slightly pull the trigger.) I had the same problem when i first took apart my sniper.
If that screw is the wrong way it will act as if the safety is on. The screw can only go one way or the other, just turn it clockwise or counter a 180 degree turn and put it back together.
If that screw is the wrong way it will act as if the safety is on. The screw can only go one way or the other, just turn it clockwise or counter a 180 degree turn and put it back together.
Thats what happened with mine it is a simple fix, in the arm that holds the autotrigger arm and goes trought he trigger frame there is a cut part that allows the trigger to be pulled if installed correctly.
#9
condowarren
- Member
-
- Group: Members
- Posts: 50
- Joined: 10-February 13
- Gender:Male
- Location:Canada
-
Posted 19 March 2013 - 10:20 PM
Vidalecent, on 17 March 2013 - 11:01 PM, said:
condowarren, on 17 March 2013 - 07:31 PM, said:
no the safty is not on.... im not a retard
I never called you one. No need to get snarky. Sorry for trying to help, buddy.
On a side note:
You are correct. Your did not infer that I have a metal disability, however your question did suggest that I was not a very bright person. How was the grammar on that one?
To all of those who helped with my problem I am grateful.
Thank you,
#10
Vidalecent
- Low-end Lover
-
- Group: Members
- Posts: 166
- Joined: 11-December 12
- Gender:Male
Posted 19 March 2013 - 11:52 PM
condowarren, on 19 March 2013 - 10:20 PM, said:
Vidalecent, on 17 March 2013 - 11:01 PM, said:
condowarren, on 17 March 2013 - 07:31 PM, said:
no the safty is not on.... im not a retard
I never called you one. No need to get snarky. Sorry for trying to help, buddy.
On a side note:
You are correct. Your did not infer that I have a metal disability, however your question did suggest that I was not a very bright person. How was the grammar on that one?
To all of those who helped with my problem I am grateful.
Thank you,
So asking a question now suggests that someone is not bright? Did that one make you feel the same way? I asked a simple question that could have very possibly been the solution to your problem. Why? Because sometimes the simplest solution is the correct one.
This post has been edited by Vidalecent: 19 March 2013 - 11:57 PM
#11
Jalen
- Resident Psychopath
-
- Group: Members
- Posts: 1,585
- Joined: 01-October 10
- Gender:Male
Posted 20 March 2013 - 07:29 AM
Well if it's not the safty...
Is it that the trigger won't budge at all? Or does nothing happen when you do pull it.
Does it cock if you pump it?
Is it that the trigger won't budge at all? Or does nothing happen when you do pull it.
Does it cock if you pump it?
I only play paintball so I can tell dirty jokes.
#12
condowarren
- Member
-
- Group: Members
- Posts: 50
- Joined: 10-February 13
- Gender:Male
- Location:Canada
-
Posted 01 April 2013 - 12:43 PM
I took it apart the other day to find out what's going on and I think that the safety wasn't installed properly. I removed the grip frame and was pulling the trigger and I saw the sear slip underneath the dissingaged safety. So what seems to be the problem is the safety is not completely dissingaging, no matter how hard I pass the button.
I apologise Vidalecent for acting like a child.
I apologise Vidalecent for acting like a child.
#13
Vidalecent
- Low-end Lover
-
- Group: Members
- Posts: 166
- Joined: 11-December 12
- Gender:Male
Posted 01 April 2013 - 03:22 PM
condowarren, on 01 April 2013 - 12:43 PM, said:
I took it apart the other day to find out what's going on and I think that the safety wasn't installed properly. I removed the grip frame and was pulling the trigger and I saw the sear slip underneath the dissingaged safety. So what seems to be the problem is the safety is not completely dissingaging, no matter how hard I pass the button.
I apologise Vidalecent for acting like a child.
I apologise Vidalecent for acting like a child.
I'm sorry, too.
Share this topic:
Page 1 of 1