Ninja tank Pin Leak cause and how to deal with it
Posted 22 February 2013 - 08:59 PM
Posted 22 February 2013 - 09:38 PM
Sponsored by KEE, H2 Paintball, Empire
The Hooligans Paintball Team
Bob Long Victory Ripper Dye Rotor Dye Throttle 70/4500
Bob Long Ripper FST
Posted 22 February 2013 - 11:04 PM
Use a non petroleum silicone lube.
Posted 22 February 2013 - 11:24 PM
Yes, be careful pushing it out and use a pencil to push it back in do it is not damaged
Posted 22 February 2013 - 11:28 PM
This post has been edited by marceldacs: 22 February 2013 - 11:29 PM
Posted 23 February 2013 - 07:13 AM
Yes and next time lube the bonnet threads with any lube and do not tighten the reg into the Asa. Put it all the way in and back it out a hair. Never force it into an Asa and check the threads of the Asa.
Most of the time the threads of the Asa are not correct or damaged causing the issue.