[paintballer008]

I have my quest that I'm trying to repair, at the moment it is leaking a large amount of air through the solenoid or right before it gets in it. I took apart the frame so I could pin point where the leak was coming from and it was coming through the solenoid. I also tried shooting the gun with the leak and it would shoot a little amount of air like the solenoid was blown.

I bought a noid on here from a guy who said has never used it and put it in and had the same problem. I replaced the bolt o-rings and had the same problem. I have an older board so I don't have a manual to reset it back to stock settings, is there anythings else I should try?

Thanks

[hogzilla88]

I have a similar issue with mine, I was told by critical that it was the valve core, only a $12 part.

[paintballer008]

let me know if that works