TechPB Forum: Spec R Bolt Problem - TechPB Forum

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Spec R Bolt Problem Bolt slides forward when regulator opens without firing trigger

#1 User is offline   redsoxfanjoe 

  • Member
  • PipPip
  • Group: Members
  • Posts: 64
  • Joined: 23-October 08
  • Gender:Male
  • Location:Lexington, VA

Posted 14 April 2012 - 07:54 PM

G3 Spec R
L7 Tech T Bolt for G3
Rampage Board

No leak when the ASA is turned on, but the regulator was screwed tight. As soon as I open regulator the board slides forward and there is a clear leak through the bolt. I checked all the orings but none of them are damaged. Its lubed with smart parts greese. Any ideas?



***put new orings on it. when gased and regulator on, the bolt is forced forward but the bolt won't go back and thats why the air is leaking.

This post has been edited by redsoxfanjoe: 14 April 2012 - 08:30 PM

#2 User is offline   andrewthewookie 

  • Pull start me and I'm yours ;)
  • PipPipPipPipPipPipPipPip
  • Group: Moderator
  • Posts: 19,454
  • Joined: 22-August 09
  • Gender:Female
  • Location:Your bedroom


Posted 14 April 2012 - 08:02 PM

Is there an o-ring/groove on the bolt tip?

The Spec-r uses a different bolt than the G3, so if you have the regular G3 engine, that's why it's not working in your Spec-r.

This post has been edited by andrewthewookie: 14 April 2012 - 08:03 PM

Posted Image
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 • Feedback - 21/0/0
Fear is the mind-killer

#3 User is offline   redsoxfanjoe 

  • Member
  • PipPip
  • Group: Members
  • Posts: 64
  • Joined: 23-October 08
  • Gender:Male
  • Location:Lexington, VA

Posted 14 April 2012 - 08:06 PM

if you google it you can see what it looks like, there is one on the tip but at its base

#4 User is offline   redsoxfanjoe 

  • Member
  • PipPip
  • Group: Members
  • Posts: 64
  • Joined: 23-October 08
  • Gender:Male
  • Location:Lexington, VA

Posted 14 April 2012 - 08:17 PM

i've researched, i made sure it was the spec r bolt system. so still i have a problem

This post has been edited by redsoxfanjoe: 14 April 2012 - 08:22 PM

#5 User is offline   andrewthewookie 

  • Pull start me and I'm yours ;)
  • PipPipPipPipPipPipPipPip
  • Group: Moderator
  • Posts: 19,454
  • Joined: 22-August 09
  • Gender:Female
  • Location:Your bedroom


Posted 14 April 2012 - 08:19 PM

This one is for the G3:

Posted Image


This one is for the Spec-r/G4

Posted Image
Posted Image
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 • Feedback - 21/0/0
Fear is the mind-killer

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users