[Tucan9999]

Can anyone give me a list of everything I would need to build a Cyborg from just a frame and body? Its an 06 body and frame. I also need a place to get them, so a legit site would be nice.Thanks.

[ABOMBER760]

PB Kingdom is really the only place you'll find an old borg, and maybe ranjerz

[Tucan9999]

What parts would I need?
PB Kingdom sells the parts but they sell them in like peices so if I use them what all do I have to buy?

[Z3R0]

You have only the frame and body, no other internals at all? You will need:

- An AKA/MacDev threaded feedneck
- Any Cyborg bolt/bolt pin
- Any Cyborg valve with matching poppet and a jam nut to hold the valve in place
- Any Cyborg ram housing/body and the proper cap as well as its two o-rings
- Any Cyborg ram, of course with its three o-rings as well
- Any Cyborg LPR assembly with the proper internals to go with it (if 07-style LPR you do not need an LPR spacer, otherwise you do), as well as a valve spring
- Any 06/07/Droid trigger with trigger pin and retainer screw
- An 06 Cyborg microswitch harness w/ necessary mounting screws
- An 06/07/Droid board
- 06/07/Droid board mounting screw
- Any Cyborg vertical ASA w/ proper mounting screw and locking pin
- A gauge or plug to go on the vertical ASA
- Solenoid manifold and o-rings and its (two?) mounting screws
- Cyborg/Droid solenoid and its two mounting screws
- Any Cyborg eyes
- 06 Cyborg battery harness w/ mounting screws for on/off switch
- Any 06/07/Droid grips and the six grip screws
- Eye covers with one eye cover screw each
- Frame screws
- Some kind of regulator
- A Cocker threaded barrel
- That's about it.

I may have missed something but I think that's about all you need to build an 06 Cyborg, besides the body and frame.

-Z3R0

This post has been edited by Z3R0: 07 February 2009 - 08:11 PM

[Tucan9999]

Thanks. It seems like I could buy a new Cyborg cheaper though.

[Z3R0]

Yea, you probably could.

-Z3R0

[boblongfreak]

ABOMBER760, on Feb 7 2009, 06:53 PM, said:

PB Kingdom is really the only place you'll find an old borg, and maybe ranjerz

i live like 15 minutes from them

[RIP-Buttercup]

It wold be cheaper to buy it whole. However, many of the 07 parts are interchangeable. Putting the 07 red valve, LPR and newer board would give you almost the same performance as an 07.

PB Kingdom is the best for older models, but rangerzproshop.com and don't overlook macdev.net who has almost everything.

[Kking4321]

I have 2 06 cyborg at the house right now. im trying to sell one if you are interested.