[CanadianBigGame]

Thought I would start a Tippmann Clan for all the Tippmann fans out there! Searching around i did not find one.
Whats your favorite marker and what do you use on the field.



My favorite marker is my (Kitten Smasher)
Tippmann 98 Platinum
Polished internals
Clicky pen mod
Rocket Cock II
Orange Howitzer Front Bolt
JCS Blackpoint Red Hot Power Tube
Zero Kick Hammer
Fang Trigger
98 Cyclone Feed
X7 Low profile hopper
Cyclone Vortex Mod
Cyclone Lightning Rod
Quick exhaust piston housing
Squishy paddles
Apex Barrel
Car Stock
M4 Iron Sight
Boss Man Mag Kit


Tippmann Clan Members

#1 CanadianBigGame
#2 Kidneys
#3 pbtohiglo
#4 hockeyfan269
#5 Tecner
#6 Jdaddy615
#7 Kilroy_WAS_HERE
#8 TIP203
#9 dson25
#10 dorathemagicchicken
#11 09PmRpUnlsHer
#12 Lord Odin
#13 JJ GBR
#14 Capt. Kirk
#15 Jester
#16 RelentlessPB7
#17 MasterMind88
#18 lovebunny
#19 Evil Fingers
#20 Red
#21 sickbugs
#22 robopaintballer
#23 DaytonaStreetLights
#24 AcesHigh
#25 GrimRam713
#26 Bill
#27 U83R 1337
#28 gsmith38
#29 dannyboy786
#30 dvs
#31 dbonar1
#32 mdkobriger
#33 3migo
#34 oblivian
#35 Paul_Eddy
#36 Panda Man
#37 flipnotize21
#38 Beef
#39 snowboarder202
#40 lukeballa33
#41 fieldblazer
#42 Evil Fingers
#43 Al Sharpton
#44 cptcomisi94
#45 Maj Tom
#46 AoSpades
#47 Strider
#48 tigar19
#49 tippmannr
#50 southFLballer
#51 zop1o
#52 stevenarroyo
#53 CIERA1932

This post has been edited by CanadianBigGame: 05 December 2009 - 10:01 AM

[Kidneys]

CanadianBigGame, on Nov 23 2008, 12:54 AM, said:

Thought I would start a Tippmann Clan for all the Tippmann fans out there! Searching around i did not find one.
Whats your favorite marker and what do you use on the field.

My favorite marker is my
Tippmann 98 Platinum
Polished internals
Clicky pen mod
Rocket Cock II
Apex Barrel
Car Stock
98 Cyclone Feed
X7 Low profile hopper
Cyclone Vortex Mod
Cyclone Lightning Rod
Quick exhaust piston housing
Squishy paddles
M4 Iron Sight
Remote Coil

And thats the one i use almost all the time.

does the dead on rocket cock 2 actually fit the 98 platinum series? oh and the signature says it all plus a X7 hopper

[pbtohiglo]

A-5 in sig, we've got 3 98s besides..... does that qualify me?

[CanadianBigGame]

Kidneys, on Nov 23 2008, 11:06 PM, said:

does the dead on rocket cock 2 actually fit the 98 platinum series? oh and the signature says it all plus a X7 hopper

Yeah man take out the two screws and the rocked cock comes with ones and it bolts right on. Very easy, I like it because if you take a shot in the marker it dosn't fill your internals with paint. Some people thing it makes your gun quieter but i don't notice it.

pbtohiglo, on Nov 23 2008, 11:24 PM, said:

A-5 in sig, we've got 3 98s besides..... does that qualify me?

Are you a tippmann fan? Do you own tippmanns? Then you qualify!

[hockeyfan269]

Sweet. I LOVE tippmanns. I'll list my mods below.

Tippmann A-5
Cyclone barrel
E-grip
Double Trigger
Clicky Pen Mod
RAP4 hose



Jus simple now, but I'm going to get into it more...BTW, anyone know how to polish the internals of an A5???

This post has been edited by hockeyfan269: 07 January 2009 - 11:47 PM

[CanadianBigGame]

hockeyfan269, on Nov 24 2008, 12:26 AM, said:

Sweet. I LOVE tippmanns. I'll list my mods below.

Tippmann A-5
Cyclone barrel
E-grip
Double Trigger
Clicky Pen Mod


Jus simple now, but I'm going to get into it more...BTW, anyone know how to polish the internals of an A5???

I would assume its the same as polishing the internals of any other Tippmann product. Take everything out and shine the insides up with some super fine 1500 sandpaper or steel wool. I've attached a link to help you out.

http://www.a5og.net/5-internals/82-how-pol...-internals.html

Its not too hard just make sure you don't take off too much if your using a dremel.

[Kidneys]

CanadianBigGame, on Nov 23 2008, 07:59 PM, said:

Yeah man take out the two screws and the rocked cock comes with ones and it bolts right on. Very easy, I like it because if you take a shot in the marker it dosn't fill your internals with paint. Some people thing it makes your gun quieter but i don't notice it.



Are you a tippmann fan? Do you own tippmanns? Then you qualify!

THANKS!!! i was really looking to get one, now i am!!! i have got paint in the internals and it sucks

[CanadianBigGame]

Glad to help you will like it. The only problem with it is if you have a stock on your marker it might get in the way a little bit. With my CAR stock i have to have it in the second position or i cant cock the gun.

[Kidneys]

CanadianBigGame, on Nov 25 2008, 08:25 PM, said:

Glad to help you will like it. The only problem with it is if you have a stock on your marker it might get in the way a little bit. With my CAR stock i have to have it in the second position or i cant cock the gun.

no i dont have a stock, is it a cooler way to cock the gun?

[CanadianBigGame]

Kidneys, on Nov 26 2008, 12:40 AM, said:

no i dont have a stock, is it a cooler way to cock the gun?

Its different i will say that some people like it (like me) others don't the main reasons i use it are as follows.
1. It keeps the cocking handle inside so you don't smack your mask or whatever with the moving cocking handle
2. It keeps paint and debris out of the internals.
3. Some people say it makes my marker quieter
4. I like the look of it.

[hockeyfan269]

CanadianBigGame, on Nov 26 2008, 12:07 AM, said:

Its different i will say that some people like it (like me) others don't the main reasons i use it are as follows.
1. It keeps the cocking handle inside so you don't smack your mask or whatever with the moving cocking handle
2. It keeps paint and debris out of the internals.
3. Some people say it makes my marker quieter
4. I like the look of it.

I wonder if it would could also be for an a5.....?

[CanadianBigGame]

hockeyfan269, on Nov 26 2008, 11:26 PM, said:

I wonder if it would could also be for an a5.....?

I'm not sure about the A5 because it uses the holes in the marker from the screw holes. I have never seen one on an A5 but that doesn't mean it wont fit.

[hockeyfan269]

CanadianBigGame, on Nov 30 2008, 05:27 AM, said:

I'm not sure about the A5 because it uses the holes in the marker from the screw holes. I have never seen one on an A5 but that doesn't mean it wont fit.

We could probably make it fit if we wanted to lol.

[CanadianBigGame]

You can make anything fit if you want to lol.

[Tecner]

CanadianBigGame, on Nov 23 2008, 11:05 PM, said:

I would assume its the same as polishing the internals of any other Tippmann product. Take everything out and shine the insides up with some super fine 1500 sandpaper or steel wool. I've attached a link to help you out.

http://www.a5og.net/5-internals/82-how-pol...-internals.html

Its not too hard just make sure you don't take off too much if your using a dremel.

Hay thanks for the link...it really helped, to anyone who wants to do this...do not be afraid, it it super easy..i used the wire wheel on my dremel to make quick work of the job ( no fear of removing too much material..its not gonna happen) after wire wheeling, just take 000 grade steel wool and go over it..then what i did was use a alunimum polish and the fiber wheel for the dremel or cloth buffer wheel (whatever you want to call it) and polish the channel....then take a paper towel and rubbing alcohol and clean the parts ( if you have stubborn corners use a 3m sanding pen, which is nothing more than fiberglass strands bunched up in a pen like caseing, which you can buy at a local autoparts store..also if you want you can use 600 grit sandpaper...try not the muscle down on the chanel...(wet or dry) then use 1500(wet or dry) then proceed with the polish and then the alcohol cleanup..after that take your marker oil and lightly lube the channel-bolt-powertube and reassemble and enjoy

[CanadianBigGame]

Glad to hear you managed to polish the internals just fine. Its not hard i did it when i first bought my marker.

[Tecner]

hockeyfan269, on Nov 23 2008, 10:26 PM, said:

Sweet. I LOVE tippmanns. I'll list my mods below.

Tippmann A-5
Cyclone barrel
E-grip
Double Trigger
Clicky Pen Mod


Jus simple now, but I'm going to get into it more...BTW, anyone know how to polish the internals of an A5???

what is the clicky pen mod?

[CanadianBigGame]

Tecner, on Dec 4 2008, 05:50 AM, said:

what is the clicky pen mod?

The clicky pen mod is taking out the trigger spring and replacing it with a lighter faster spring.

Makes the trigger pull lighter in a RT or mech trigger.
Take a Bic click stic pen (the cheap ones that you get free at the bank or other retailer) and remove the spring off the ink cartridge. Remove the front trigger spring from you marker.
Measure against the clicky spring and cut to length.
Install new spring in marker.
Makes finding the RT "sweet spot" a lot easier.

[Jdaddy615]

i'm a big tippman fan and am a member of a5og and x7og (jdaddy615 at both)
got an x7
full m16 kit
open red dot site
m16 carry handle rail mount
response trigger
polished internals
rap4 car stock
pen click mod
squishy paddles
tech t vortex (aluminum ratchet)
sp progressive 14" barrel
cp 14" barrel
custom painted hopper
3 point spec ops sling

also got an A5
egrip
shroud
3 point spec ops sling

remember, tippmanns are heavy so if it doesnt work, you can always hit them over the head with it

This post has been edited by Jdaddy615: 04 December 2008 - 10:35 AM

[CanadianBigGame]

Members list updated!