[brycelarson]

Alright, due to the number of requests that I get I will now start to take barrels for freak boring.

Price will be $30 per barrel plus actual shipping back to you. I will be accepting barrels in trade. I will offer a discount of $10-15 per extra barrel you send along. You pay when I ship the barrel back.

Things to note:

• Not all barrels can be freak bored. If it's one I know works that's fine. If I haven't seen it in person I'll need a picture with a ruler.
  
• This is custom work - I try to do them quickly but if you send it to me expect me to have it for a month or two.
  
• If I kill your barrel you don't have to pay. I'm not going to buy you another one or give you any compensation in return.
  
• I don't suggest freak boring on barrels that are already small bore. I don't suggest using an insert bigger than .004 smaller than the original barrel. For example, if you send me a .693 to bore I don't suggest using a freak insert bigger than .689.
  
• If I'm too busy to do your barrel I might tell you no. Don't take it personally, this is a sub-hobby for me not a business.
  
• The simplest way to get a freak bored barrel is to buy one I've already done. Check with me to see what I currently have in stock.

phantom barrels



Ion / Impulse Dye


Various other barrels


Bob Long barrels

This post has been edited by brycelarson: 14 October 2010 - 11:31 AM

[paintballjohn]

Nice of you to do this Bryce. Your barrels have worked awesome for me thus far.

[SuperG91]

Can you do a SL68 II (Original) barrel?

[brycelarson]

SuperG91, on 14 October 2010 - 06:43 PM, said:

Can you do a SL68 II (Original) barrel?

I think so - post a picture with a ruler or something else that I can check scale on.

[lovebunny]

its that my blue phantom barrel?


btw you did great work on the phantom and the cocker barrel

[brycelarson]

lovebunny, on 15 October 2010 - 03:52 AM, said:

its that my blue phantom barrel?


btw you did great work on the phantom and the cocker barrel

yes and thanks

[Special Ed]

Sweet, I've been wanting to get my TPX barrels freaked. I'll get you a pic tonight.

[brycelarson]

Special Ed, on 15 October 2010 - 12:25 PM, said:

Sweet, I've been wanting to get my TPX barrels freaked. I'll get you a pic tonight.

stock TPX? I've got one at home - I can just check that one out. I think it'll be fine.

[J. Nez]

Would you be able to bore the back from an FEP 007 barrel?

Might be worth using if I can get that done... .696 is a little large for my tastes

[brycelarson]

J. Nez, on 17 October 2010 - 06:24 PM, said:

Would you be able to bore the back from an FEP 007 barrel?

Might be worth using if I can get that done... .696 is a little large for my tastes

take a picture next to a ruler / tape measure and post it.

[J. Nez]

brycelarson, on 18 October 2010 - 08:14 AM, said:

take a picture next to a ruler / tape measure and post it.

Can do. I assume you need it looking down the barrel, correct?

This post has been edited by J. Nez: 18 October 2010 - 03:24 PM

[brycelarson]

J. Nez, on 18 October 2010 - 03:24 PM, said:

brycelarson, on 18 October 2010 - 08:14 AM, said:

take a picture next to a ruler / tape measure and post it.

Can do. I assume you need it looking down the barrel, correct?

nope, I need to see how thick the back is and how long the barrel stays that thick. from the side please.

[J. Nez]

brycelarson, on 18 October 2010 - 05:11 PM, said:

nope, I need to see how thick the back is and how long the barrel stays that thick. from the side please.

Ah. Good thing I checked. I'll get those shortly.

[J. Nez]

Wait. I lied. Sorry.

I'm a very visual learner... or just plain dumb. Because I still don't know what to do.

Demo pic?

[brycelarson]

see the one above with my multi-tool? like that. I need to see that the gun end of the barrel is wide and long enough to bore.

[J. Nez]

Don't want to clutter your thread with the pic, so here's the link.

[brycelarson]

J. Nez, on 19 October 2010 - 10:50 AM, said:

Don't want to clutter your thread with the pic, so here's the link.

does the back screw inside the front? can you take it apart and snap the same picture?

[J. Nez]

brycelarson, on 19 October 2010 - 03:31 PM, said:

does the back screw inside the front? can you take it apart and snap the same picture?

Indeed it does, and yes, I can.

Unfortunately, it's a little too big for my little ruler, and I can't find a different one at this point. Let me know if you need anything else.

This post has been edited by J. Nez: 19 October 2010 - 03:54 PM

[brycelarson]

J. Nez, on 19 October 2010 - 03:53 PM, said:

brycelarson, on 19 October 2010 - 03:31 PM, said:

does the back screw inside the front? can you take it apart and snap the same picture?

Indeed it does, and yes, I can.

Unfortunately, it's a little too big for my little ruler, and I can't find a different one at this point. Let me know if you need anything else.

yes, I can bore that.

[nickydp33]

decent price. too bad all my barrels are set lol