[recklessbob]

I went to change the firing mode on my pmr and now my noid isnt clicking.. any help would be appreciated.

[510waffles]

check if your eyes are set correctly. see if turning off your eyes will get the thing to click. If you just changed the firing mode, you messed up something small that you have overlooked.

[recklessbob]

i turned the eyes off. but ya its weird. it clicks once then it doesnt click anymore

[510waffles]

recklessbob, on 01 November 2012 - 08:21 PM, said:

i turned the eyes off. but ya its weird. it clicks once then it doesnt click anymore

try a new battery

[recklessbob]

ya imma go to the store tommrrow to pick one up. ill let you know if it works i appreciate the help

[recklessbob]

anyone else have some advice

[Cheeks]

Same thing just happened to mine. If its not a battery then it might be the battery wire. That's what the problem with mine was. I traded it that day. Proto as a whole is just a bad luck thing for me.

[recklessbob]

Cheeks, on 03 November 2012 - 01:33 AM, said:

Same thing just happened to mine. If its not a battery then it might be the battery wire. That's what the problem with mine was. I traded it that day. Proto as a whole is just a bad luck thing for me.

Was the gun turning on? mine turns on and lights up fine

[recklessbob]

messing around with it i wound up breaking the batter harness so i guess i have to buy a new one lol hopefully it will fix the problem

[dertydood]

Yeah I've had bad luck with proto as well. My SLG did this same exact thing. Try setting the dipswitches back to factory default and see what happens. It could be a faulty board, or the battery could be low.

[Cheeks]

It will turn on and fire once but that's it

[recklessbob]

ya it turns out i somehow fried the board so i picked up a virtue borad for 35 on amazon