[Rotozip2]

I would just get the rebuild kit, $22 is going to be cheaper than buying a whole new reg.

[OEFVeteran]

figured i would pass this on to your all as i thought it was interesting... i cant confirm this... but in inspecting the front of the lower tube it does not appead to have a serial number that was cut off... there are no partial letters like ive seen on other bodies...

Quote

Also i forgot to mention, if you look at the serial very closely you will see you can only see a "1" on the right side of the body, it was number 1 of team aftershock guns that year. I cant say how many were made, i assume a small amount since it was for the team. But you have number 1. Thought you should know. Thats a special sfl

This post has been edited by OEFVeteran: 22 January 2013 - 03:02 AM

[bassfisher]

http://www.flickr.co...N04/8404856364/ here's my proof, I do plan on getting some pneumatics for it also.

[OEFVeteran]

So, I finally got that ugly ass twist lock feed neck off the sfl, and replaced it with a Sanchez machine lever lock. Looks much nicer, will post pics when I can

[cocker addict]

was it loctited?

[OEFVeteran]

It looked like some old blue loctite... Was a pain in the ass to take off

[cocker addict]

I might be the new owner for a AM-P illusion. I have been looking for one of these for along time and serial number 66 is for sale. Updates to come. Looks like it's mine, these are awesome markers

This post has been edited by cocker addict: 24 January 2013 - 11:36 PM

[Kevin]

New WDIT video on cockers, I go a little nuts at the end.

[cocker addict]

Kevin, why don't you have a system X dragon? This must be corrected.

[Kevin]

everytime one pops up I dont have the cash. Thats the one system X gun that holds its value, and considering it has the EXACT same parts as a Vengeance Base (which can be had for around 100), its hard to justify spending 300 on one.

[OEFVeteran]

i was going through my box of parts the other day... i forgot i had a xonic chrome noid cover and 4 button FA xonic board... you guys have any idea what they are worth?

[Kevin]

not much... I picked up a spare Xonik board and eye for 20 bucks.

also, no one see my epic fanning action at the end of the video? It would have been even faster if the 3 way was lubed and not sticking. notice the backblock keeps sticking back, must have been the cold.

[cocker addict]

Yea buddy, that's some intense fanning. I had a dragon for a short period of time. I bought the body off millertime for $100, made a pump with spare parts I had lying around and sold it.

[Kevin]

Maaaan, thats a good deal. I'm always looking for them, theres a grey one for sale on mcb, guy wants like 250...

[andrewthewookie]

Front block came in today, so I could finally complete it. It's mech right now, cause I just wanted to get it shooting, but as soon as I get MQs in it's gonna be e-framed. Gonna eventually get the Ultralite back bored for freaks so I don't have to use the sizer.

This post has been edited by andrewthewookie: 28 January 2013 - 06:10 PM

[Dev.]

I wanna join.

[Rotozip2]

I like it Dev. Forsome reason plain and simple cockers always catch my fancy.

[Dev.]

I'm seriously considering finding another brick body, except vert feed. I dunno though, I like right feed cause I can sight over the top. BUt then my hopper sticks out 40 feet to the right.

[Kevin]

Gotta use the smallest elbow possilbe. The Viewloader VL-BOW I've found to have the lowest profile, smaller than ones from PMI and GXG.

[Dev.]

I have an armson profeed elbow. I bought like 5 vl bows cause of how small they were. Quality seems to have gone down terribly. They all cracked so easily. This armson profeed is nice, as small profile as the vl bow but 10x more durable.