New Tiberius Arms T4.1
#1
Posted 05 December 2012 - 01:02 PM
#4
Posted 09 December 2012 - 03:37 PM
#5
Posted 09 December 2012 - 04:15 PM
My setup: Because I'm a bad*** Tippmann 98 custom with a shake and bake and two 20oz C02 tanks. Be jelly!
#6
Posted 09 December 2012 - 04:20 PM
#7
Posted 10 December 2012 - 04:43 PM
PREDATOR 47, on 09 December 2012 - 03:37 PM, said:
It now includes the following.
*13/3000 PSI Tank Stock
*683 Lapco Rifle Barrel
*lightweight polycarbonate lower
From a maintenance standpoint, the most important improvements were done internally. The T4.1 bolt and air chamber, as well as trigger group and regulator components are now the same as the T8.1/T9.1. This means that those parts for all 3 are interchangeable allowing for current T8.1/T9.1 owners easier maintenance if they decide to pick up a T4.1
Let me know if you have any more questions.
#8
Posted 10 December 2012 - 08:22 PM
#9
Posted 16 December 2012 - 11:25 PM
#10
Posted 16 December 2012 - 11:29 PM
Gio24Dude, on 10 December 2012 - 04:43 PM, said:
PREDATOR 47, on 09 December 2012 - 03:37 PM, said:
It now includes the following.
*13/3000 PSI Tank Stock
*683 Lapco Rifle Barrel
*lightweight polycarbonate lower
From a maintenance standpoint, the most important improvements were done internally. The T4.1 bolt and air chamber, as well as trigger group and regulator components are now the same as the T8.1/T9.1. This means that those parts for all 3 are interchangeable allowing for current T8.1/T9.1 owners easier maintenance if they decide to pick up a T4.1
Let me know if you have any more questions.
Wait wait wait, did you say rifle barrel or did you mean rifled barrel. Cause that would suck if it was rifled. Anyways, the mags are about as big as those 9 ounce CO2 tanks that used to direct mount on old paintball guns.
#11
Posted 17 December 2012 - 04:45 PM
MangoPhett, on 16 December 2012 - 11:29 PM, said:
Gio24Dude, on 10 December 2012 - 04:43 PM, said:
PREDATOR 47, on 09 December 2012 - 03:37 PM, said:
It now includes the following.
*13/3000 PSI Tank Stock
*683 Lapco Rifle Barrel
*lightweight polycarbonate lower
From a maintenance standpoint, the most important improvements were done internally. The T4.1 bolt and air chamber, as well as trigger group and regulator components are now the same as the T8.1/T9.1. This means that those parts for all 3 are interchangeable allowing for current T8.1/T9.1 owners easier maintenance if they decide to pick up a T4.1
Let me know if you have any more questions.
Wait wait wait, did you say rifle barrel or did you mean rifled barrel. Cause that would suck if it was rifled. Anyways, the mags are about as big as those 9 ounce CO2 tanks that used to direct mount on old paintball guns.
Rifled*
#12
Posted 17 December 2012 - 04:52 PM
MangoPhett, on 16 December 2012 - 11:29 PM, said:
Usually I'd agree, however, this rifling was designed specifically with the FS rounds in mind. If you're using the T4.1 with FS rounds, it is definitely a plus.

Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 • Feedback - 21/0/0
Fear is the mind-killer
#13
#14
Posted 17 December 2012 - 07:54 PM
This post has been edited by andrewthewookie: 17 December 2012 - 07:55 PM

Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 • Feedback - 21/0/0
Fear is the mind-killer

Help

























