So I recently purchaced a Smart Parts Vibe, ive seen videos on youtube of stock Vibes that whne you turn it on, you can cycle through semi, 3 round burst and full auto. And all those modes have blinking lights, yet when i turn mine on, all that happenes is its in the solid red light and nothing else?So im assumimng its a board problem.. its only a problem in the short run since evntually ill upgrade to the Blackheart board, but i want my stock board to still work normally...
Ideas?
Page 1 of 1
VIbe board issue? NO 3 round burst or full auto?
#1
Posted 20 July 2011 - 11:32 AM
#2
Posted 20 July 2011 - 11:42 AM
Whoops, wrong section? can a mod move this to the Tech Studio/Gun tech room into the proper section?
#3
Posted 20 July 2011 - 12:36 PM
bloodshot, on 15 June 2009 - 02:13 PM, said:
if its on tourney lock take out the battery and hold the trigger and put the battery back on while holding the trigger till the light blinks
1 blink = select fire
2 blink = tourney lock
3 blink = 3 semi auto then burst kinda ramping
4 blink = billy ball 1 shot every 2 seconds
how to change vibe modes (NOT my vid just found it to show you how)
1 blink = select fire
2 blink = tourney lock
3 blink = 3 semi auto then burst kinda ramping
4 blink = billy ball 1 shot every 2 seconds
how to change vibe modes (NOT my vid just found it to show you how)
from a quick google search. that helped alot.. So i just found my answer..I guess mods can close this.
Share this topic:
Page 1 of 1

Help












