Posted 11 May 2012 - 10:40 PM
1st air efficiency, i will be using a 68/4500 most the time filled to 3000
48/3000 filled to 3000 can i get estimates on both tanks sizes thanks also there mid and low pressure.
2nd accuracy it will have a 14" CP barrel 689 bore
3rd what kinda upgrades would be great for this marker to be used in tournaments
4th does is shoot psp3 if so what the bps.
5th thanks for the time to answer the top 4. and im happy to be in the GOG family.
Posted 18 May 2012 - 11:27 PM
2. Accuracy really isnt a factor in paintball as much as you would be looking at the best shot to shot consistency you can get with your system. A lot of that will be factored with how well your barrel bore size is matched to the size of the paint your shooting. With the current trends with paint sizes i think if you picked up a .685 bore back that would be your best match.
3.Well you have a solid barrel so for real results i think a new high pressure reg and inturn because of the non macroline hose they use a new ASA would be great choices. For other small things that would make life easier, maybe a new feedneck, trigger, maybe a bolt.
4. Yes it has PSP 3 shot capped at 11 BPS.
Hit up the SP owners club if you have any other questions.
Posted 20 May 2012 - 02:33 PM
the trinity has roller bearings, so it should be a bit smoother..
if you want to use it for tournies.. the Blackheart board may help, atleast the eyes part.