Boss Bolt V2 vs. Techt Bolt vs. Lurker Bolt
Posted 22 January 2013 - 09:28 PM
My Gearbag Sale!
Posted 22 January 2013 - 09:30 PM
The Boss bolt is a lighter "drop in" bolt made from a different material to make it lighter and the Lurker bolt is made from the same light material "delrin" but changes the way the marker fires.
All bolts should work with your marker if they are made specifically for your marker i.e. you cannot fit a G6R TechT bolt in a Mini.
Posted 23 January 2013 - 12:16 AM
A shocker is a great thing to have, but I highly doubt you could fit the whole thing inside of a mini.
On a more serious note, make SURE that whatever you're about to buy says it's for the Axe/Mini. The coolest bolt kit in the world won't help much if it doesn't fit your gun.
My Gearbag Sale!
Posted 23 January 2013 - 12:23 AM
Posted 23 January 2013 - 12:25 AM
I lol'd hard at that one.
The best customer service is the one you don't have to call in the first place.
Posted 24 January 2013 - 11:57 PM
Boss bolt xsv more consistent however tended to stick to much, thereby decreasing smoothness. Lurker, interesting install, however smoothest of all bolts thereby leading to more consistent ball flight. Dwell settings on my axe are higher then Lurker recommends or it doesn't shoot very well. Combined this with a Lurker barrel and I have had a lot of comments from tournament players on how quite this set is. One ref did not even hear me shoot someones shoe from 10 feet away. I had to call a paintcheck on the guy. Overall, smoothness is what you are trying to achieve, been down this road....choose Lurker 1st, boss 2nd. Or try both as there is a blurker set up out there I have not tried.
Posted 18 February 2013 - 08:16 PM
Late to the party, but you can find info about the blurker modification here: http://www.pbnation....d.php?t=3821379
Basically, you take the Boss bolt spacer and add it to a Lurker bolt. You'll also see in that post that after getting feedback from the users that Lurker started adding a flat o-ring to his package to accomplish the same result. I do not know of anyone that's tried both the Boss spacer and the Lurker flat o-ring to see if it works as well. Users seemed to be very happy with the blurker performance.
Mechanical Marker Fan: Azodin Kaos-D / Tippmann Crossover