[Pennywise]

Hi there guys...

I got this DP G3 from a seller. Got it secondhand. Tested everything and it was ok.
When i got to the field to play, at first it was doing fine, but then i noticed that
i was using a lot of air...eventhough i wasn't shooting that much.

Had to refill the tank (68ci) after each round of game. Weird.
Then i noticed a slight hissing sound coming from the front of the marker.
There are two screws in front. Not sure what they are used for. The manual doesn't state anything on it.

Tried tightening them. Still leaking. Took them out, reinstalled it. Worse......

Does anyone had this problem and solved it?
Thanks in advance guys....

Ps: Attached is the picture of the two screws placement.
 2013-03-11 11.29.08.jpg (117.8K)
Number of downloads: 8

[andrewthewookie]

Those are the air transfer line plugs. Do you have any teflon tape to wrap those screws with before screwing them back in? Basically, they're just supposed to plug the air lines drilled through the body.

[Pennywise]

andrewthewookie, on 11 March 2013 - 12:37 AM, said:

Those are the air transfer line plugs. Do you have any teflon tape to wrap those screws with before screwing them back in? Basically, they're just supposed to plug the air lines drilled through the body.

I see....so there are no functions to them?
Didn't want to do anything before asking.
Was thinking of doing that, but i was being precocious.

Thanks for the reply and help!!!

[andrewthewookie]

Yeah, those are just supposed to be screwed in and never touched again (as long as they're not leaking).