G3 Spec-R issue not firing properly.
Posted 15 January 2012 - 07:19 PM
Posted 15 January 2012 - 07:22 PM
Posted 15 January 2012 - 07:32 PM
End of the trigger pull. I'm sorry my description is wrong, it fires but a paintball only fires every other trigger pull, my loader is a Dye rotor.
dry firing it cycles everytime.
Posted 15 January 2012 - 07:35 PM
Also, I'm assuming it only does this with the eyes on and paint in the gun?
This post has been edited by andrewthewookie: 15 January 2012 - 07:36 PM
Posted 16 January 2012 - 11:09 AM
At first I had bolt stick issues but I cleaned and relubed with Dye Slick lube I didnt have any Dow33. It cycles everytime I pull the trigger meaning it fires but a paintball only comes out every other trigger pull. I have done everything from clean and lube the bolt, set the dwell to 12, cleaned and adjusted the regulator, removed and serviced the solenoid, cleaned the eyes (and made sure the eyes are working). I tried adjust the trigger but the 2 black adjustment screws wont move in or out im afraid I am going break the allen key, strip the set screw.
I am going to chrono the gun today at a local field and test again.
Posted 16 January 2012 - 04:11 PM
Trigger adjustment shouldn't be a problem. Use the shorter end of the allen key, to put more leverage on it, they are locktited down.
Also, the Dye lube IS a version of Dow 33