[nonameputs]

So I just got this PM8 and took the whole thing apart to clean/re-lube everything. I took the LPR out and noticed that I had an extra shim in the stack. According to the manual, the shim stack is supposed to look like this:

)()()()()()


Mine looked like this:

()()()()()()

The bold ones are the larger shims.

I've also read that some people have to run their LPR at 4-5 turns out as opposed to the suggested 2.5-3 turns out. Could this have something to do with an extra shim in the stack?

This post has been edited by nonameputs: 23 September 2012 - 09:29 PM