TechPB
Help
I recently bought a invert mini and was trying to turn up the pressure with the tank unscrewed. instantly win I screwed in the tank it made a blaring noise and air was leaking every wear. I unscrewed it and looked at my guage to notice that is was just dangiling
Page 1 of 1
invert mini help asa gauge
#1
minipballer 
- Newbie
-
- Group: Members
- Posts: 1
- Joined: 26-February 13
Posted 26 February 2013 - 08:53 PM
#2
kingJurzy
- TechPB's best member 2012
-
- Group: Members
- Posts: 7,968
- Joined: 04-January 12
- Gender:Male
- Location:Bay Area, California
-
Posted 26 February 2013 - 08:57 PM
You blew the gauge.
Why would yo even try to adjust pressures without the gauge? You may have broken the seal too which sucks on your part.
Why would yo even try to adjust pressures without the gauge? You may have broken the seal too which sucks on your part.
Lime, on 04 May 2013 - 08:45 PM, said:
Dude, I wouldn't pay anymore than tree fiddy for a kingjurzy.
FEEDBACK: 20/0/0
#3
gorgeousllama
- THE LLAMA.
-
- Group: Members
- Posts: 552
- Joined: 20-January 13
- Gender:Male
- Location:Virginia
-
Posted 27 February 2013 - 02:39 PM
Nice... adjust the pressure WITH THE TANK ON. You blew something...
#4
Soundwave
- I win paintball.
-
- Group: TechPB Players Club
- Posts: 643
- Joined: 11-February 10
- Gender:Male
- Location:Melbourne, Australia
Posted 28 February 2013 - 08:21 AM
So I'll be guessing you've blown the gauge, half the seals, perhaps the transfer tube....
I'm sorry, we can't help you in here after that. You need to send your marker in to KEE to be repaired, and then I strongly suggest taking it to your local tech or proshop and have them give you a short class on the correct operation of your marker.
I'm sorry, we can't help you in here after that. You need to send your marker in to KEE to be repaired, and then I strongly suggest taking it to your local tech or proshop and have them give you a short class on the correct operation of your marker.
#5
PREDATOR 47
- Member
-
- Group: Members
- Posts: 1,289
- Joined: 14-November 12
- Gender:Male
- Location:Ohio
Posted 28 February 2013 - 10:10 AM
No offense, but you REALLY messed up on this one. You're going to have to send it in to Kee or find someone who is very experienced in teching minis or Axes, because there have to be quite a few things that got blown up after what you did.
#6
get.lit.up!
- 200lb of unpredictable coming to hunt ya ;)
-
- Group: Members
- Posts: 2,708
- Joined: 08-August 11
- Gender:Male
Posted 28 February 2013 - 09:04 PM
minipballer, on 26 February 2013 - 08:53 PM, said:
I recently bought a invert mini and was trying to turn up the pressure with the tank unscrewed. instantly win I screwed in the tank it made a blaring noise and air was leaking every wear. I unscrewed it and looked at my guage to notice that is was just dangiling
Wow I can't even start on how incredibly stupid that is. So I'm taking you have not read this nice thing called a manual? Pro tip read it Honestly send it in to KEE, but
THEY ARE UNDER NO OBLIGATION WHATSOEVER TO FIX
STUPID SHIT LIKE THIS
I had a used sniper with the gauge blown, they didn't even replace the gauge. I think the best thing you can do is to sell this cheap for parts.
This post has been edited by get.lit.up!: 28 February 2013 - 09:05 PM
Share this topic:
Page 1 of 1