[The Crazy Cow]

I decided I wanted to build a sniper intead of ordering a CCM (more personal). I have a few questions.

1. What grip frame do you recomend? Would I look for a slide trigger frame or get an 86.

2. What lower tube internals are better Check It internals or CCM internals.

3. This is just for opinion because I can't decide what body to get.

This:
http://paintballgate...p2k5prboki.html

or This:
http://paintballgate...miorbokit1.html

This post has been edited by The Crazy Cow: 26 March 2012 - 09:11 PM

[PBKidKill]

one why raw bodies.

Two 86* frame

three ccm internals
Four you want just to buy the full autotrigegr kit from ccm,

Five
have fun

[The Crazy Cow]

PBKidKill, on 26 March 2012 - 08:51 PM, said:

one why raw bodies.

Because if possible a custom anno.

[hogzilla88]

1. Personal preference.

2. I'd get either CCM out of the two, but I'd go with AKA for efficiency.

3. I'd get none of those...find a nice non-WGP body (freeflow, BBT/ST, Belsales, etc), WGP bodies are pretty ugly for the most part (except the karni, jole, and vertabrae), and extremely common.

This post has been edited by hogzilla88: 26 March 2012 - 09:33 PM

[drg]

1. Whatever you can get within your price range ... 45 sliders, hopefully metal construction, are well priced choices. Can't go wrong with CCM frames, maybe Sanchez frame? I have not used one of those.

2. Depends if you want the CCM valve or not, if not then the rest doesn't matter that much. Many people like CCM for simplicity, as in you buy one time and everything works together.

3. Of those two, the first one, avoid mini bodies if you can, unless you really like orracles. But keep in mind that those bodies are unanodized and you sure as hell can't get it anodized for $10, so you may want to consider one of the already anodized bodies.