I have a G3iq, which I love. However, recently, I am getting a first shot drop off with the first shot or two. After that, the gun shoots fine. I am running the Tech-T L7 bolt engine in it. I have changed all the o-rings in the reg and on the bolt. I also have serviced the noid. I am using Hater sauce lube. Is this a sign that my solenoid is going and needs to be replaced or perhaps a board issue? Any ideas would be greatly appreciated!
thanks!
Page 1 of 1
First Shot drop off with a G3iq
#3
Posted 03 December 2012 - 08:06 PM
They are stock. I have not changed them since I bought the marker a few years ago. I have it set on PSP mode and have not changed that since the beginning either.
Will play for beer!
#4
Posted 05 December 2012 - 01:52 PM
Did you change the battery? My friend had similar issues at the field, although the drop off got progressively worse, until the battery was changed.
"Memory is cheap." -Dr. Sam Kassegne
#5
Posted 05 December 2012 - 02:22 PM
8765, on 05 December 2012 - 01:52 PM, said:
Did you change the battery? My friend had similar issues at the field, although the drop off got progressively worse, until the battery was changed.
Yep! that was the first thing I thought of. It has a fresh battery.
Will play for beer!
Share this topic:
Page 1 of 1

Help


















