TechPB
Help
Posted 11 October 2011 - 10:59 PM
So I just got my Axe and a new prophecy LTD and the axe is to quiet to use the sounds mode. I have the sound set a high as it can go. HELP
Page 1 of 1
Axe dosnt work with prophecy ltd
#2
drunkenpriest 
- I relax 8 days a week.
-
- Group: Members
- Posts: 1,660
- Joined: 10-December 10
- Gender:Male
#3
misterkyle
- Senior Member
-
- Group: Members
- Posts: 1,059
- Joined: 07-August 11
Posted 21 December 2011 - 11:27 PM
change settings on prophecy
#4
littleloopy15
- Master Member
-
- Group: Members
- Posts: 3,116
- Joined: 12-January 11
- Gender:Male
- Location:New York
-
Posted 21 December 2011 - 11:31 PM
just scream every time you want to shoot 
haahaha
but yeah are you sure that you have the prophecy all the way up? my friends use their prophecys and axes and they work fine.
haahahabut yeah are you sure that you have the prophecy all the way up? my friends use their prophecys and axes and they work fine.
Feedback 17/0/0
Setup- Luxe, Rotor v3, ProFlexes, Ninja 68/45
Checkout LibertyPaintball-NY.com
Setup- Luxe, Rotor v3, ProFlexes, Ninja 68/45
Checkout LibertyPaintball-NY.com
#6
Eskimo
- Member #: 666 ( Seriously )
-
- Group: Members
- Posts: 5,895
- Joined: 28-September 08
- Gender:Male
- Location:Whitby
-
Posted 22 December 2011 - 12:10 PM
use has manuel?
Reads das manuel
you dont?
http://www.paintball...ual_w_cover.pdf
The Prophecy Loader is defaulted to Sound Activation. Simply turn the
Prophecy Loader on and check that the loader is being activated by the sound
of your marker. If necessary you can adjust the sound sensitivity level to match
your markers sound signature. See the Board Function section for more details
on changing the sensitivity.
Sound Sensitivity - 6 levels of adjustment, level (1) being the least sensitive and
level (6) being the most sensitive.
Note:
It is better to have the microphone setting less sensitive and still able to detect
the marker firing. Do not set it to 6 if setting 2 detects the marker firing
correctly. Only use a higher setting if the lower setting does not detect the
marker firing.
Page 15 describes how to change the settings on your loader.
make sure to always set it when shooting paint physically at the range.
and most people can get their loader to sound activate at setting 3
not sure why yours wont work.
Reads das manuel
you dont?
http://www.paintball...ual_w_cover.pdf
Quote
The Prophecy Loader is defaulted to Sound Activation. Simply turn the
Prophecy Loader on and check that the loader is being activated by the sound
of your marker. If necessary you can adjust the sound sensitivity level to match
your markers sound signature. See the Board Function section for more details
on changing the sensitivity.
Quote
Sound Sensitivity - 6 levels of adjustment, level (1) being the least sensitive and
level (6) being the most sensitive.
Note:
It is better to have the microphone setting less sensitive and still able to detect
the marker firing. Do not set it to 6 if setting 2 detects the marker firing
correctly. Only use a higher setting if the lower setting does not detect the
marker firing.
Page 15 describes how to change the settings on your loader.
make sure to always set it when shooting paint physically at the range.
and most people can get their loader to sound activate at setting 3
not sure why yours wont work.
This post has been edited by Eskimo: 22 December 2011 - 12:11 PM
Citrus Connection
Proudly Partnered With: PBL, Vanguard Paintball, TechPB, Pinokio Hoppers
Proudly Partnered With: PBL, Vanguard Paintball, TechPB, Pinokio Hoppers
#7
DrewaV
- Master Member
-
- Group: Members
- Posts: 2,880
- Joined: 02-August 11
- Gender:Male
- Location:Southern California
-
Posted 23 December 2011 - 12:39 AM
Eskimo, on 22 December 2011 - 12:10 PM, said:
use has manuel?
Reads das manuel
you dont?
http://www.paintball...ual_w_cover.pdf
The Prophecy Loader is defaulted to Sound Activation. Simply turn the
Prophecy Loader on and check that the loader is being activated by the sound
of your marker. If necessary you can adjust the sound sensitivity level to match
your markers sound signature. See the Board Function section for more details
on changing the sensitivity.
Sound Sensitivity - 6 levels of adjustment, level (1) being the least sensitive and
level (6) being the most sensitive.
Note:
It is better to have the microphone setting less sensitive and still able to detect
the marker firing. Do not set it to 6 if setting 2 detects the marker firing
correctly. Only use a higher setting if the lower setting does not detect the
marker firing.
Page 15 describes how to change the settings on your loader.
make sure to always set it when shooting paint physically at the range.
and most people can get their loader to sound activate at setting 3
not sure why yours wont work.
Reads das manuel
you dont?
http://www.paintball...ual_w_cover.pdf
Quote
The Prophecy Loader is defaulted to Sound Activation. Simply turn the
Prophecy Loader on and check that the loader is being activated by the sound
of your marker. If necessary you can adjust the sound sensitivity level to match
your markers sound signature. See the Board Function section for more details
on changing the sensitivity.
Quote
Sound Sensitivity - 6 levels of adjustment, level (1) being the least sensitive and
level (6) being the most sensitive.
Note:
It is better to have the microphone setting less sensitive and still able to detect
the marker firing. Do not set it to 6 if setting 2 detects the marker firing
correctly. Only use a higher setting if the lower setting does not detect the
marker firing.
Page 15 describes how to change the settings on your loader.
make sure to always set it when shooting paint physically at the range.
and most people can get their loader to sound activate at setting 3
not sure why yours wont work.
Lolz to this thread. All you do bud is up the mic volume look at the manual above.
Share this topic:
Page 1 of 1