what is actually important in paintball
#1
Posted 28 November 2012 - 12:32 AM
#2
Posted 28 November 2012 - 12:37 AM
Like NEW eNMEy For Sale
Distortion_UK, on 05 December 2011 - 07:05 PM, said:
#3
Posted 28 November 2012 - 12:39 AM

Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 • Feedback - 21/0/0
Fear is the mind-killer
#4
#5
Posted 28 November 2012 - 12:49 AM
#6
Posted 28 November 2012 - 01:29 AM
Im also disappoint you didnt mention aggness
#7
Posted 28 November 2012 - 01:29 AM
Im also disappoint you didnt mention aggness
#8
Posted 28 November 2012 - 04:07 PM
I can see the desire for the perfect paint in a tournament/competitive type scenario, but for rec ball in my opinion its pointless.

PBNation Feedback 13/0/0 TechPB Feedback 2/0/0
#9
Posted 28 November 2012 - 04:43 PM
Yeah, GOOD paint is critical. But, I think there is a misconception that "brand" name paint will always be good... I've seen some EXCELLENT mid grade paint, and then the next time I went to buy it, it looked like dimpled cheese balls...
The KEY is to LOOK at it before you buy it, no matter if it is from a box store OR your local pro shop.
The things I look for. No visible seam. If you can see the seam, it will shoot lousy. If it is dimpled, it will shoot lousy. If it has broken balls in the bag, it will coat the inside of your barrel and shoot lousy... I even made a video months ago about this very subject.
Right now I am using some EXCELLENT paint, best I have used in years, and I got it from my local field as it was "seconds" from the factory. It is Draxxus something. (labeled generic since it was discounted) but this stuff shoots amazing. And you know what, I shoot WAY less of it as I can hit my target so much easier. (course I still throw a bunch of paint at times, because I ENJOY doing that...)
But, for $45 I would have bought a bunch more cases, only thing is they were out... So I got the last case and a bag from them... What we should push for is "born on" dating on the cases, and teaching companies how to transport and store paint. If they put it on a truck that is over 100 degrees, it will ruin the paint... And if they sit it on a shelf for 6 months... again, it will likely be bad as it has to be turned.
#10
Posted 28 November 2012 - 05:12 PM
Field 1 (low, mid, high) - Valken Infinity, Valken Fate, Draxxus Bronze
Field 2 (low, mid, high) - XO Spectrum, Empire Custom Blend, Empire RPS Premium
A lot of people I've seen talking about paint on these forums don't consider either of those "high" grades as good paint.
Mechanical Marker Fan: Azodin Kaos-D / Tippmann Crossover
#11
Posted 28 November 2012 - 05:12 PM
^I can only buy what the field stocks.
#12
Posted 28 November 2012 - 05:35 PM
It was all the field offered though....
#13
Posted 28 November 2012 - 05:45 PM
FreeEnterprise, on 28 November 2012 - 04:43 PM, said:
Yeah, GOOD paint is critical. But, I think there is a misconception that "brand" name paint will always be good... I've seen some EXCELLENT mid grade paint, and then the next time I went to buy it, it looked like dimpled cheese balls...
The KEY is to LOOK at it before you buy it, no matter if it is from a box store OR your local pro shop.
The things I look for. No visible seam. If you can see the seam, it will shoot lousy. If it is dimpled, it will shoot lousy. If it has broken balls in the bag, it will coat the inside of your barrel and shoot lousy... I even made a video months ago about this very subject.
Good amount of truth to this, freshness/batch quality is a big factor that affects just about all paint. In many cases high end paint may be handled better by the reseller than the field grade stuff, but whenever I am forced to buy mid to low end paint, freshness and batch quality (i.e. ask someone else how it's shooting and um ... look at his balls) are the keys.
High end paint though does have distinct advantages that overcome some of the fluctuations in individual batch (or case) quality -- such as better breakage on target and better marking.
PUMPPB.COM TIGHTSTICK - Custom LAPCO 1-piece underbore barrel! SALE!
PUMPPB.COM - Pump paintball forums
HawaiiPB.com - Paintball forums for the state of Hawaii
HawaiiPB/PumpPB - Our videos
#14
Posted 28 November 2012 - 06:01 PM
#15
Posted 28 November 2012 - 06:42 PM
-Biggie Smalls
Learned the hard way not to use a speedfeed when its raining. 8/6/11
#16
Posted 28 November 2012 - 07:18 PM
#17
Posted 28 November 2012 - 08:47 PM
bigx, on 20 May 2013 - 09:45 PM, said:
#19
Posted 28 November 2012 - 09:55 PM
As Cockerpunk stated, the most important thing in paintball is the actual paintballs. Call them our linchpin, without them we are just making noise. Of course with the paintballs there will always be three crucial factors involved with it: cost, quality, and availability. If you talk to the guys who used to play back in the 80's, paint cost has definately gone down and to an extent the availability has gone up. So at least those to things are going for us but as far as quality is concerned, paintballers in general need to demand that the quality of paint go up. I don't think anyone can expect this change to happen overnight, but if enough people demand it then I am sure the producers will eventually decide that it is the correct step to take.
#20
Posted 28 November 2012 - 10:03 PM
Phoenix01, on 28 November 2012 - 09:55 PM, said:
exactly right. and it starts by convincing people, that maybe instead of spending 1000 dollars on hard goods that really, when the rubber meets the road, doesn;t really help you much putting paintballs on the other team - but spending a bit more for better paint, will actually make a difference in your ability to put paintball on the other team. and paying that 10-25 buck premium, is actually the single most cost effective way to help your game.
you sell that idea to players -> quality and availability of quality paint, will improve.

Help





























