[Llabtniap]

I did the pen spring mod which did help with the ease of trigger pull, but is there anything else I can do make my A5 trigger faster/better?

[GeezusPB]

Theres always the E-Grip... But it's $120

[Llabtniap]

I want to keep it mech and no RT

[GeezusPB]

You can replace the trigger spring with a couple of rare earth magnets. Magnets can be found at RadioShack for around two dollars. This makes the trigger pull very light and smooth.

[Llabtniap]

Do you have more detailed info on how to do that? It sounds quite interesting

[Llabtniap]

Bump

[GeezusPB]

Ive only seen it on a friends before, no idea what to go about on doing it, but I would assume you would just take aprt the trigger assembly, take out the trigger spring and replace it with the magnet. It should stick right on. https://www.google.c...uCyiowMkvyiM%3A -here's a little pic showing you where the spring is.

^^ Make sure you replace the trigger spring-- not the sear spring.

[Billy Badass-RPF]

No matter what you still need to have the same amount of pull to actually break the sear loose and get the bolt to fire,by changing the spring you just make it easier to pull up-to that point and after it brakes.