TechPB
Help
I have a ninja tank set for 480 pressure, yes I know I can change it, and I was wondering what high end guns work at this pressure? I own a vapor and am interested in trading it, but want to make sure it will work at this pressure WITHOUT me changing the pressure because I already sweet spotted my pump to it. Thanks in advance!
Page 1 of 1
Guns that would work at 480pressure (high end)
#2
andrewthewookie 
- Pull start me and I'm yours ;)
-
- Group: Moderator
- Posts: 19,436
- Joined: 22-August 09
- Gender:Female
- Location:Your bedroom
-
-
-
Posted 03 December 2012 - 05:45 PM
All of them. You can probably get away with using it on the Vics and G6Rs too.
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 • Feedback - 21/0/0
Fear is the mind-killer
#3
Kanas
- 684! Exit 4
-
- Group: Members
- Posts: 1,423
- Joined: 05-July 11
- Gender:Male
-
Posted 03 December 2012 - 05:59 PM
andrewthewookie, on 03 December 2012 - 05:45 PM, said:
All of them. You can probably get away with using it on the Vics and G6Rs too.
Thanks, egos geos fine? Luxes too? Thanks again for the quick response bro!
R.I.P BORG!
#4
G4paintballer
- Gun/gear whore
-
- Group: Members
- Posts: 5,838
- Joined: 11-November 10
- Gender:Male
- Location:Western Wisconsin
Posted 03 December 2012 - 06:19 PM
Pretty much every electro will work on LP air. Except a few low low end electros.
#6
510waffles
- Senior Member
-
- Group: Members
- Posts: 1,697
- Joined: 02-September 10
- Gender:Male
Posted 03 December 2012 - 07:24 PM
G4paintballer, on 03 December 2012 - 06:19 PM, said:
Pretty much every electro will work on LP air. Except a few low low end electros.
Nope, certain regs dont have the capacity to keep up with LP air. Regs such as the S3 reg on earlier egos will have the gun starving for air. the SL3 on the geo2 and ego11 are fine.
in reality it depends on which HPR you have
480 PSI isnt going to be enough for Tippmans with cyclone feeds. If its above 500 dollars and made within the last 2 year it should be fine.
#7
dertydood
- Sophomore Member
-
- Group: Members
- Posts: 571
- Joined: 30-September 08
- Gender:Male
- Location:Springfield Missouri
Posted 03 December 2012 - 07:27 PM
Yeah most modern paintball markers work with high output. The only ones that might be iffy are the g6r's and the victories.
Swap my Ego 11 parts! OG green for white, black, silver etc.... http://www.techpb.co...1
My feedback- http://www.techpb.co...howtopic=217960-
My feedback- http://www.techpb.co...howtopic=217960-
#8
Pakistani
- www.AliZaman.com
-
- Group: Members
- Posts: 2,173
- Joined: 30-September 08
- Gender:Male
- Location:Richmond, VA
Posted 03 December 2012 - 09:05 PM
510waffles, on 03 December 2012 - 07:24 PM, said:
G4paintballer, on 03 December 2012 - 06:19 PM, said:
Pretty much every electro will work on LP air. Except a few low low end electros.
Nope, certain regs dont have the capacity to keep up with LP air. Regs such as the S3 reg on earlier egos will have the gun starving for air. the SL3 on the geo2 and ego11 are fine.
in reality it depends on which HPR you have
480 PSI isnt going to be enough for Tippmans with cyclone feeds. If its above 500 dollars and made within the last 2 year it should be fine.
i ran an 05 ego on low pressure back when they first came out.
theres a lot of hear say about LP/HP, but the basic rule is that if the tank puts out more than the guns operating pressure, you'll be fine.
KPS Paintball • VCU Rams • Richmond Rage•••••••If you need help with a Dye gun, PM me!
Share this topic:
Page 1 of 1