[Rhino1909]

I took off stock lube, relubed lightly. Took my enmey out for the first time last weekend. I noticed my shots would drop. 1 great, 2 meh, 3,4,5 drop thirty, twenty feet ahead. So I just relubed the shit out of it, and tried shooting it again and got same results.
My tank has 1.5k psi. Hopper is halo too. Motor speed 3, mic sensitivity 3. And the other setting is on.
The only thing that I noticed with it was when I put the tank in the for the second time at the field. I swear it sounded like a leak in the gripframe. So I shot it once and the hissing went away. It hasnt made that noise since. Also, when i slightly pull the trigger, i can hear air, im assuming thats normal though.
Idk if it is bolt stick or if its not enough air is getting in, no clue.

This post has been edited by Rhino1909: 09 January 2013 - 07:04 PM

[Vidalecent]

You probably have a small leak somewhere in the the frame. You should check all your seals. Like your banjos or banjo o-rings.

This post has been edited by Vidalecent: 09 January 2013 - 07:15 PM

[Rhino1909]

Grr, I guess I'll take apart the gun n check. Any other ideas?

[Rhino1909]

It's apart, what exactly am I looking for?

[Rhino1909]

Nothing looks wrong though, all attached and tight

[Cookybiscuit]

Rhino1909, on 09 January 2013 - 07:03 PM, said:

So I just relubed the shit out of it

Wipe it all down and lube it with a thin coating of lube, thin... as in, you could probably get away with using two pea sized blobs for the whole thing.

[Rhino1909]

Cookybiscuit, on 09 January 2013 - 08:46 PM, said:

Rhino1909, on 09 January 2013 - 07:03 PM, said:

So I just relubed the shit out of it

Wipe it all down and lube it with a thin coating of lube, thin... as in, you could probably get away with using two pea sized blobs for the whole thing.

K will do boss

[andrewthewookie]

Did you shoot it at all before taking it apart and messing with it?

[Orange Chicken]

Oh ok here this is a problem I had with mine. The asa is prone to unscrewing. This is most likely the problem. Just tighten the tank, and make sure its tight. Ive had this happen to me at the field, and I thought I did improper maintainence, when it turns out that the tank just slightly unscrewed itself.

[Rhino1909]

andrewthewookie, on 09 January 2013 - 08:56 PM, said:

Did you shoot it at all before taking it apart and messing with it?

No, I got rid of stock lube, relubed it, played on sunday

[Orange Chicken]

Rhino1909, on 09 January 2013 - 07:03 PM, said:

I took off stock lube, relubed lightly. Took my enmey out for the first time last weekend. I noticed my shots would drop. 1 great, 2 meh, 3,4,5 drop thirty, twenty feet ahead. So I just relubed the shit out of it, and tried shooting it again and got same results.
My tank has 1.5k psi. Hopper is halo too. Motor speed 3, mic sensitivity 3. And the other setting is on.
The only thing that I noticed with it was when I put the tank in the for the second time at the field. I swear it sounded like a leak in the gripframe. So I shot it once and the hissing went away. It hasnt made that noise since. Also, when i slightly pull the trigger, i can hear air, im assuming thats normal though.
Idk if it is bolt stick or if its not enough air is getting in, no clue.

Also, sorry for the double post, but I missed the part that you noticed a leak, yeah, make sure to really tighten those banjos; theres two o rings on the top and bottom of both, make sure those are there. Unless you took it apart initally and somehow put it together unproperly(honestly the enmey is the easiest thing to maintain/take apart/put together out there), then its unlikely that its anything wrong with the hoses being pinched and such. Check the banjos, and make sure the tank is secure, as well as the reg on the gun.

[Rhino1909]

I just looked at the hoses, nothing looked wrong

[Rhino1909]

Sorry I am destroying this thread, but to be clear I took the trigger frame off and can see the valve and two hoses. Nothing looks wrong

[Orange Chicken]

...secure tank? Or yeah there should also be a third hose. But still, wheres the leak? And theres always just tightening it up. Ill make a video tonight and put it on youtube on disassembly and tips and such. But only if I have time.

[Rhino1909]

MangoPhett, on 09 January 2013 - 10:37 PM, said:

...secure tank? Or yeah there should also be a third hose. But still, wheres the leak? And theres always just tightening it up. Ill make a video tonight and put it on youtube on disassembly and tips and such. But only if I have time.

im gonna test it tom and see if shots r still dropping, if they are then there must be a leak. and i have no heard any hissing since. i guess my question is can you hear anything when u pull the trigger slightly but not all the way, say 1/2 pull?

[III Kezia III]

Rhino1909, on 09 January 2013 - 10:49 PM, said:

MangoPhett, on 09 January 2013 - 10:37 PM, said:

...secure tank? Or yeah there should also be a third hose. But still, wheres the leak? And theres always just tightening it up. Ill make a video tonight and put it on youtube on disassembly and tips and such. But only if I have time.

im gonna test it tom and see if shots r still dropping, if they are then there must be a leak. and i have no heard any hissing since. i guess my question is can you hear anything when u pull the trigger slightly but not all the way, say 1/2 pull?

you shouldn't that doesn't sound normal at all, also even if you cant eyeball and see something is wrong just replace all the o-rings and try it again

[Orange Chicken]

Lulzjustbeingacat :D, on 09 January 2013 - 11:41 PM, said:

Rhino1909, on 09 January 2013 - 10:49 PM, said:

MangoPhett, on 09 January 2013 - 10:37 PM, said:

...secure tank? Or yeah there should also be a third hose. But still, wheres the leak? And theres always just tightening it up. Ill make a video tonight and put it on youtube on disassembly and tips and such. But only if I have time.

im gonna test it tom and see if shots r still dropping, if they are then there must be a leak. and i have no heard any hissing since. i guess my question is can you hear anything when u pull the trigger slightly but not all the way, say 1/2 pull?

you shouldn't that doesn't sound normal at all, also even if you cant eyeball and see something is wrong just replace all the o-rings and try it again

No you should. Dont listen to him. Thats very common in three way valve guns such as the enmey and autocockers. The valve is only halfway pressed so some pressure is released. Totally normal, dont worry. I beleive it is called shortstroking, but im no cocker guy so I could be wrong on the name. Regardless, it is what it is, and you shouldnt worry about it.

[Rhino1909]

it works... i had way to much lube on it. that and i will continue to check to make sure my tank stays tight, cause i did notice it came once or twice. thanks guys!

[Orange Chicken]

Yeah when lubing, as mike said in one of his videos, just lube enough to get the oring and fill in the small gap around both sides of it. Make sure to use grease,not oil, and only the orings. Dont put too much.

[Rhino1909]

I got a new barrel so I aired it up n tried it out. Shots were dropping, so only lubed only the o rings this time n went to dry fire it cause I don't want to waste any more paint for bolt stick issues that I thought I solved. So I rapid fired, n then I heard a very noticeable leak. As soon as I take off the trigger frame, I can see the valve, n 3 hoses. Should I continue to unscrew stuff or where do I go from there?