[iambrandon0610]

there seems to be a huge puff of air that blows out of the back of the bolt when i fire the marker and i was just wondering if that was at all normal i know from what ive read so far that it is normal for air to come out of the trigger frame at the reg i was just wondering if anyone had any input on that. thanks

[Soundwave]

Ok, what you need to do is remove your propshaft from your bolt assembly (Actually, first make sure you have a brand new #14x2 oring and a #20x2 oring. This doesn't mean 2 number 14's, it's a 14x2)

You can find instructions for how to remove your propshaft on page 54 of your manual. Then I want you to change the rear #14x2 oring on the propshaft, and the #20x2 oring on the back cap. Grease those orings, re-assemble and let me know if that fixes your problem

Good luck!

[iambrandon0610]

Soundwave, on 29 January 2013 - 09:13 AM, said:

Ok, what you need to do is remove your propshaft from your bolt assembly (Actually, first make sure you have a brand new #14x2 oring and a #20x2 oring. This doesn't mean 2 number 14's, it's a 14x2)

You can find instructions for how to remove your propshaft on page 54 of your manual. Then I want you to change the rear #14x2 oring on the propshaft, and the #20x2 oring on the back cap. Grease those orings, re-assemble and let me know if that fixes your problem

Good luck!

just an update im waiting on the oring's to come in i had to order them.. thanks by the way

[iambrandon0610]

ok i got the orings replaced and now i have a very small leak down the front of the bolt but there is no more puff of air out of the back i dont know if the small leak is there because of the tank only having about 500 psi left in it or what

[Soundwave]

Well, what you've done is fixed one leak and found another lol. Air up your tank then replace the inside can oring, and the middle bolt oring.

[iambrandon0610]

everything is fixed again and not leaking.......THANK YOU...... so so so mcuh

[Soundwave]

Any time buddy