[jdlarson11]

I have an old eclipse regulator i wanted to stick on my automag to use as a foregrip, will this interfere with the marker at all?

Thanks!

JD

[ninjapaintball]

jdlarson11, on 25 March 2010 - 09:54 AM, said:

I have an old eclipse regulator i wanted to stick on my automag to use as a foregrip, will this interfere with the marker at all?

Thanks!

JD

depends. if you open the reg up all the way and it regulates at a higher pressure then the mag then no. If it regs at the same or lower pressure then the mag reg then yes it will.

[jdlarson11]

ninjapaintball, on 25 March 2010 - 10:00 AM, said:

jdlarson11, on 25 March 2010 - 09:54 AM, said:

I have an old eclipse regulator i wanted to stick on my automag to use as a foregrip, will this interfere with the marker at all?

Thanks!

JD

depends. if you open the reg up all the way and it regulates at a higher pressure then the mag then no. If it regs at the same or lower pressure then the mag reg then yes it will.

Will do, im just going to open it up where the reg wont do anything. Counter clockwise all the way out.

[ninjapaintball]

jdlarson11, on 25 March 2010 - 10:27 AM, said:

ninjapaintball, on 25 March 2010 - 10:00 AM, said:

jdlarson11, on 25 March 2010 - 09:54 AM, said:

I have an old eclipse regulator i wanted to stick on my automag to use as a foregrip, will this interfere with the marker at all?

Thanks!

JD

depends. if you open the reg up all the way and it regulates at a higher pressure then the mag then no. If it regs at the same or lower pressure then the mag reg then yes it will.

Will do, im just going to open it up where the reg wont do anything. Counter clockwise all the way out.

yes but my concern is that it will still regulate that air to 500 psi or less. Some regs when opened up all the way will not regulate while others will have a top end like 400- 500 psi.

[jdlarson11]

What pressure is needed for a mag?

Wonder if i could take the guts out of the reg>?

[ninjapaintball]

jdlarson11, on 25 March 2010 - 10:59 AM, said:

What pressure is needed for a mag?

Wonder if i could take the guts out of the reg>?

i think mags run at 650 psi????

if you take the guts out of a reg it may leak. You need to get the reg to not regulate but no leak. If you can get the seat out of the piston then this will do the trick

[brycelarson]

Gordon's emag is really happy at the 950 of the reg that Ray sent out.

more pressure=better for mags. they already have a built in reg - so adding another is triple regging. I don't think it's worth it. just get a gas through if you want a fore-grip.

[jdlarson11]

Thanks Bryce and Ninja!

I think im going to try to take the seat out of the piston or purchase a gas through.

PS i love my Ninja Tank! See you at ll3!

[ninjapaintball]

jdlarson11, on 25 March 2010 - 11:46 AM, said:

Thanks Bryce and Ninja!

I think im going to try to take the seat out of the piston or purchase a gas through.

PS i love my Ninja Tank! See you at ll3!

if you do not have it done by LL3 let me know so i can find a gas thru for you and bring it to the event

[jdlarson11]

ninjapaintball, on 25 March 2010 - 11:50 AM, said:

jdlarson11, on 25 March 2010 - 11:46 AM, said:

Thanks Bryce and Ninja!

I think im going to try to take the seat out of the piston or purchase a gas through.

PS i love my Ninja Tank! See you at ll3!

if you do not have it done by LL3 let me know so i can find a gas thru for you and bring it to the event

Thanks so much!

I will be there with my limited edition techpb laser engraved tank.

Im going to try it tonight and I will let you guys know how it goes in the next few days.

[MagHead]

you can use it as a grip and not run the air through it...

[3migo]

MagHead, on 03 April 2010 - 11:06 PM, said:

you can use it as a grip and not run the air through it...

My thoughts exactly....

[jdlarson11]

3migo, on 07 April 2010 - 08:43 PM, said:

MagHead, on 03 April 2010 - 11:06 PM, said:

you can use it as a grip and not run the air through it...

My thoughts exactly....

i ended up buying a cheap pmi gas through that works great!

[Jerf]

So I am running all my ninja tanks with no washers in them, this means i will have to put how many back into the one i plan on running my RT Pro w/ X valve in??????

[ninjapaintball]

Jerf, on 14 September 2010 - 08:27 AM, said:

So I am running all my ninja tanks with no washers in them, this means i will have to put how many back into the one i plan on running my RT Pro w/ X valve in??????

put in the same amount that you took out. if you are unsure then add 2 red shims and try it. if it is too weak then add 1 silver shim at a time until the pressure is where you need it. if you add too many the reg willnot regulate and pop the lp burst disk.

[Jerf]

Thanks!