TechPB Forum: Need Help bad - TechPB Forum

Jump to content

Page 1 of 1

You cannot start a new topic
You cannot reply to this topic

Need Help bad 2007 pmr

#1 Protorailman

Newbie

Group: Members
Posts: 4
Joined: 18-February 13

Posted 24 February 2013 - 02:02 PM

I have a 2007 pmr. i took it to my local paintball feild to play yesterday, the ref chrono'd my gun and messed with the regulator and now no matter how much i adjust it, it barely shoots. but the day before it shot fine. now i took the reg off and cleaned it. now as soon as i hook air up it leaks right out of the back cap. i tried replacing some bad orings and changed the battery and air still leaks straight out of the back cap, even with the gun off, the noid clicks fine but im just not shure whats wrong with it. need help please!!!

#2 Vidalecent

Low-end Lover

Group: Members
Posts: 166
Joined: 11-December 12
Gender:Male

Posted 24 February 2013 - 08:27 PM

Try turning your reg all the way off and slowly up the pressure. Do a little little turn and try firing. If not, someone with more expertise should help you

#3 Perickson18

Member

Group: Members
Posts: 51
Joined: 20-February 13

Posted 24 February 2013 - 08:55 PM

Did u put the bolt back in right ? Did u crimp an o ring ? There is a port u hafta line up and i u dont it will leak right out

Sent from tapataalllkk

#4 Protorailman

Newbie

Group: Members
Posts: 4
Joined: 18-February 13

Posted 25 February 2013 - 04:15 PM

it is coming out of the gas passage screw right below and to the right of the bolt. its when the gun is even off just as soon as air is put into the gun air leaks from it. bad..