[cockerpunk]

hey guys, i've gotten the go ahead to get into the shop here and start making sweet stuff!

NOW TAKING PHUZZARD ORDERS!

140 plus shipping for the basic conversion. the more options you want, the higher the price. white or black pump handles for the same price, dyed white for extra. extra milling available. comes with rounded and slotted pump arms, button head screws and return spring.

production -

Hitman Mod with Decorative milling



Stock Handle



mod itself -



annoed black -



We can also do other work, examples as follow -

trigger stops for mags, cockers, phantoms
hidden ULE milling on mags or other guns (like frame diets for AKA guns) such as this frame diet i did to my excal this will be 25-30 depending on the extent you want it. -
a small set screw to clamp down a carters body to the valve case, such as this -
say goodbye to ever having to re-adjust your slug and valve! this will be 15 plus shipping.
Apexification - we can turn down barrels to fit the apex barrel tip. The barrels must be large OD barrels. Not all barrels will work.

prices would be on a case per case basis then.

other work -

delrin pump handle -



mini frame diet -

This post has been edited by brycelarson: 14 October 2010 - 11:17 AM

[Tucan9999]

Whats the difference between a regular Phantom and a Phuzzard?

I might be intrested depending on what it is.

[UV Halo]

Tucan9999, on 30 January 2010 - 12:53 PM, said:

Whats the difference between a regular Phantom and a Phuzzard?

I might be intrested depending on what it is.

From what I understand, It's a phantom that has been given dual pump arms, essentially making it into a Buzzard.

I suspect that the benefit is a smoother pump. In another thread, cockerpunk said that it's an improvement over the phantom, but not as good as a sniper.

[illegal immigrant]

Hey, could you do double feeding detents for phantoms? maybe even an anti rollout detent?

[cockerpunk]

illegal immigrant, on 30 January 2010 - 01:56 PM, said:

Hey, could you do double feeding detents for phantoms? maybe even an anti rollout detent?

possibly, we are working on using a spyder detent.

[jderrill]

how bought a handle for a maverik? i need one that allows for a larger od. I geuss can i buy the phuzzard handle with out the phuzzard?

[The-Phantom]

cockerpunk, on 28 January 2010 - 03:34 PM, said:

annoed black -

That is absolutely sexy

[Christopher]

If someone was to offer milling/custom services such as this, would it be best to post them here or in one of the B/S/T sections?

[lovebunny]

gordon check your pm:P
any ways i wout buy that phuzzard mood but shipping wout kill me..

mayby if i find a nother phantom,

what fun stuff can you do with an azodin?

[Darth Vader]

cockerpunk, on 28 January 2010 - 03:34 PM, said:

annoed black -

who plays the 5 string... clear grips? half blocking? custom milling?

[Bob Long Vice]

how much would the custom milling cost?

[AXPShaggy]

seems we have the making of another air smith shops....this is something that is going to b cool

[NorCalPB]

Darth Vader, on 30 January 2010 - 08:21 PM, said:

cockerpunk, on 28 January 2010 - 03:34 PM, said:

annoed black -

who plays the 5 string... clear grips? half blocking? custom milling?

12 string FTW!

[cockerpunk]

Christopher, on 30 January 2010 - 06:23 PM, said:

If someone was to offer milling/custom services such as this, would it be best to post them here or in one of the B/S/T sections?

both are fine for now, however, that may change. so keep your head up about that kind of thing.

Bob Long Vice, on 30 January 2010 - 09:10 PM, said:

how much would the custom milling cost?

on the the phuzzard? depends on what you want.

triple slots on pump arms instead of straight slot - 5 bucks
more decorative pump handle milling - depends on what you want done, probably 10 bucks
mill handle for detachable hitman mod - 15 with screws and hitman trigger

[The Desacrator]

 What is a trigger stop?




I don't know if you have the tools to do this, but you should consider freak boring of other barrels and offering discounts if people get multiple things done. Like ever X amount of dollars you spend you get Y off. Just something to consider.

[Tor]

you guys can also make a bit of coin by milling phantom hammers out. Like a grey ghost's.

[steadian]

Hello cockerpunk, I am not placing an order but I thought you might wanna get in on this http://www.techpb.co...showtopic=77144 it might help alot to increase your business if it goes through.

Hope it Helps!!

[Spyder PB Player]

can you do the Ego feedneck mod?

Where we just send the gun and the feedneck?

[illegal immigrant]

hmmm...

could you freak bore/ rethread guns/ barrels?

retape airlines, those sorta things?

[accu-rat]

Hello Cockerpunk. Did you make the horizontal feed for the stock class phuzzard in the picture. If so, how much would it cost? If not, where could I get one?