Thanks for Viewing
This is my first non-blowback so any help is greatly appreciated.
Page 1 of 1
Just Bought an Axe - What Should I Know
#2
Posted 07 January 2013 - 01:17 AM
Tune it.
Back cap 1 1/2 turns out from all the way in
Lower reg pressure until desired FPS is reached
Lower dwell until it messes with fps then add 1 blink.
Back cap 1 1/2 turns out from all the way in
Lower reg pressure until desired FPS is reached
Lower dwell until it messes with fps then add 1 blink.
Lime, on 04 May 2013 - 08:45 PM, said:
Dude, I wouldn't pay anymore than tree fiddy for a kingjurzy.
FEEDBACK: 20/0/0
#3
Posted 13 January 2013 - 09:44 PM
don't apply a huge amount of lube. A thin coat should do so that the lube doesn't cake inside. Don't turn your eyes off and then click your solenoid a lot as you will damage the noid. Also look into getting a boss bolt as an upgrade if you are looking for improved smoothness and quietness.
#4
Posted 22 February 2013 - 02:52 PM
One key thing about the axe is that when you turn your axe on the eyes are on and you want it on! When you go to press the trigger with the eyes on the axe won't shoot you would have to have a ball in the breach before you can shoot it. Just an advice if its your first electronic marker. Cause the axe is my first marker too!
#5
Posted 24 February 2013 - 01:06 AM
Hyrinmaru, on 22 February 2013 - 02:52 PM, said:
One key thing about the axe is that when you turn your axe on the eyes are on and you want it on! When you go to press the trigger with the eyes on the axe won't shoot you would have to have a ball in the breach before you can shoot it. Just an advice if its your first electronic marker. Cause the axe is my first marker too!
And this is why we read manuals before dicking around with our markers
Share this topic:
Page 1 of 1

Help















