pirahana's will do this the first time shooting, the co2 will usually come out the barrel so when you cock it back this will fix the problem, as for the ASA and macroline, bring it back to the shop or take it to a field to get your gun fixed.
Page 1 of 1
Bad air leak , new to PB Phirahna GTI leak
#1
Posted 17 May 2009 - 08:30 PM

CanEHdian Baller
DONT USE PAINTBALLWIDWARS.COM -- ITS A SCAM!
TechPB
QUOTE (AoSpades @ May 6 2009, 11:25 PM) well I don't drown kittens, I punt babies.
"Paintballers who play pump are like those who hunt bears with spears, they put themselves at a mechanical disadvantage to make it more thrilling"
#2
Posted 18 May 2009 - 06:04 PM
O thx but i alrdy sent it back to the shop might as well let the proes take a look.Ty for replying tho.
#3
Posted 03 June 2009 - 12:05 AM
The Piranha GTI's valve was horribly milled, and the stem and cup seal tend to get stuck in the valve. I usually just drilled it out a slight bit more so that the stem slides through nicely. I have fixed a ton of these guns, brand new out of the box.
This post has been edited by slayer_213: 03 June 2009 - 12:06 AM
Ambush Army
Paintballgear.ca
Ambush Paintball
Certified Tiberius Tech
"I may be going to hell, but at least it will be warm and I'll know people" - Rick from Ambush
Paintballgear.ca
Ambush Paintball
Certified Tiberius Tech
"I may be going to hell, but at least it will be warm and I'll know people" - Rick from Ambush
Share this topic:
Page 1 of 1

Help














