[pumpbusters]

http://paintballgate...vire12vopa.html

It might be a complete and utter rip off, but I'm can't be the only pump player thinking about it.

[dannyboy768]

$60 is too much. JT Revolutions which are identical are $40 at Sports Authority.

[pumpbusters]

I need to get to your sports authority.

[BurningPlaydoh]

A brand new XSV Vlocity can be had for under $50, this is a damn rip off.

[TechPB-Mike]

actually, it isnt

The thing you need to understand, is that the Revolution is designed SPECIFICALLY for set of paintball guns. Many of the guns that work best with this loader, require two things-

1) A loader with a smaller than normal feedtube, to fit into the nonclamping feedneck (Think Angel LCD, ANSGear Autococker, Sterling STP, etc)

2) A loader that doesn't put pressure on the ballstack, to push paint past the detents.


Many pump guns / autocockers don't have clamping feednecks, and only have one detent. If you stick a Rotor on it, it'll double feed like crazy, AND you can't get the loader into the feedneck.

Plus that loader is EXTREMELY lightweight, and it holds 200+ rounds, and it has a very thin profile.

It's worth $60 for the right buyer. If you've got a custom build autococker pump gun, without a clamping feedneck, this is the PERFECT loader for you

[BurningPlaydoh]

TechPB-Mike, on 05 March 2013 - 07:00 PM, said:

actually, it isnt

The thing you need to understand, is that the Revolution is designed SPECIFICALLY for set of paintball guns. Many of the guns that work best with this loader, require two things-

1) A loader with a smaller than normal feedtube, to fit into the nonclamping feedneck (Think Angel LCD, ANSGear Autococker, Sterling STP, etc)

2) A loader that doesn't put pressure on the ballstack, to push paint past the detents.


Many pump guns / autocockers don't have clamping feednecks, and only have one detent. If you stick a Rotor on it, it'll double feed like crazy, AND you can't get the loader into the feedneck.

Plus that loader is EXTREMELY lightweight, and it holds 200+ rounds, and it has a very thin profile.

It's worth $60 for the right buyer. If you've got a custom build autococker pump gun, without a clamping feedneck, this is the PERFECT loader for you

How much would a Revolution with sensor go for used?

[dannyboy768]

Around $25.

http://www.baccipain...iewloaders.html

This post has been edited by dannyboy768: 05 March 2013 - 07:07 PM

[BurningPlaydoh]

Yeah, value is relative and all that, but you could buy A LOT of Winchester, APP, Sportshot, etc. hoppers for $60. Hell, you could pick up a used Prophecy for that much. (not to imply any of those is a substitute, just some perspective)

This post has been edited by BurningPlaydoh: 07 March 2013 - 11:06 PM

[PREDATOR 47]

Paintballgateway has them for about 45 bucks.

[madsnipes]

PREDATOR 47, on 07 March 2013 - 09:17 PM, said:

Paintballgateway has them for about 45 bucks.

That is where the OP posted his link to...
Maybe they just changed the price

[cavemag]

They're 43 on there now. New revvys are exactly what I have been missing in my life. Couldn't of timed it even better now that Empires dropping a cocker.