The essential features on a marker? What's there to it?
#1
Posted 14 January 2013 - 06:55 PM
Im thinking the important ones are
Clamping feedneck
Eyes
On off asa
Board that can do all the necessary modes
That about it?
#2
Posted 14 January 2013 - 07:13 PM
That the gun shoots at least 280 fps consistently.
#3
Posted 14 January 2013 - 07:14 PM
That being said I would go for shot quality, efficiency and sex appeal. These last three things you will find in ALL high ends but few mid ends.
Lime, on 04 May 2013 - 08:45 PM, said:
FEEDBACK: 20/0/0
#4
Posted 14 January 2013 - 07:30 PM
#5
Posted 14 January 2013 - 08:09 PM
#6
Posted 14 January 2013 - 08:44 PM
This post has been edited by mustangs: 14 January 2013 - 08:44 PM
#7
Posted 14 January 2013 - 08:45 PM
http://www.techpb.co...howtopic=217982
#8
Posted 14 January 2013 - 09:06 PM
#9
Posted 14 January 2013 - 09:42 PM

Borg you will NEVER be forgotten.
TECHPB FEEDBACK IOG FEEDBACK
I bought an Ion.... in hindsight it was a bit of an Impulse buy
#10
Posted 15 January 2013 - 02:42 AM
The things I look for in a marker are:
- Reliability with little maintenance - I basically look for the Kalashnikov of paintball guns; A gun that will work no matter what gets thrown at it.
- Size - Typically the smaller, the better for me as I just prefer smaller set-ups
- Smooth and responsive trigger - Not to be confused with a response-trigger, I want a trigger that feels like I'm actually pulling a trigger. I'll typically opt for a microswitch or sear actuating springed trigger over a magnetic and/or optic trigger as it feels like I'm actually operating the marker.
- Balance - I hate guns that feel too top-heavy. That's one reason I'm not a fan of Autocockers as they just don't feel right to me.
- Conservative milling - I loathe excessive milling on a marker, like what you see with the Ripper Victories. It makes the gun look tacky in my opinion. A nice, streamlined and conservative-looking body is what I prefer.
- A decent ASA - The ASA is usually one of the first things I swap out on a gun because it's often bulky, ugly, out-dated, or uncomfortable.
- Availability of parts or customer service - I'm not all too tech-savvy so any convenience when teching a marker is a virtue to me.
There's a few more things I look at, but these are what I primarily focus on.
This post has been edited by Antonious: 15 January 2013 - 02:45 AM
#11
Posted 15 January 2013 - 05:28 AM
-Size since i love small setups
-ON/OFF ASA (bonus if the macroline comes out of the front)
-Reliability.
#12
Posted 15 January 2013 - 01:55 PM
#13
Posted 15 January 2013 - 07:13 PM
Glaciered, on 14 January 2013 - 06:55 PM, said:
Im thinking the important ones are
Clamping feedneck
Eyes
On off asa
Board that can do all the necessary modes
That about it?
all of those are totally unnecessary
just has to shoot reliably and consistently between 270-300 fps
#14
Posted 15 January 2013 - 08:04 PM
cockerpunk, on 15 January 2013 - 07:13 PM, said:
Glaciered, on 14 January 2013 - 06:55 PM, said:
Im thinking the important ones are
Clamping feedneck
Eyes
On off asa
Board that can do all the necessary modes
That about it?
all of those are totally unnecessary
just has to shoot reliably and consistently between 270-300 fps
*cough* mag *cough*
This post has been edited by paintballguy2255: 15 January 2013 - 08:04 PM
#15
Posted 15 January 2013 - 10:45 PM
#16
Posted 15 January 2013 - 11:42 PM
Shoots paint when asked EVERY TIME ALL THE TIME
Shoots said paint at the required VELOCITY
Has a good feel to the gun does not feel like its gona fall apart on my next superman slide or face plant (IT HAPPENS)
Is fun to shoot
For me i like my Automags and Tippmanns. I own quite a few other guns and brands but if needed i could be plenty happy with nothing but one of my ADG Automags and my Tippmann SL-68II.
#17
Posted 15 January 2013 - 11:45 PM
Open-Bolt (Poppet)
Efficient (12 pods/4500)

Help
























