Posted 08 October 2008 - 11:16 AM
so i got a virtued wrath to make my pump with.Now i didn't want to make a "fake pump" where all the pump arm does is cycle the bolt, so i came up with a way to make a true pump.
-so first i took the spring out of the ram sleeve, because the wrath is a fasor
-i cut the ram and basically slotted it, but i didn't relay slot it but it works as
a slotted ram would, allowing the bolt pin the push the ram back but slide the bolt forward interdependently. and this is how that looks.
-then i attached a pump arm and rod to the bolt, using a clever method i say on one of the spump threads. and well that's it ll.
so when i push back the pump arm the bolt pin moves back and sits the ram in the ready to fire position, then when i pull the trigger it pushes the ram into the popit and shoot the ball, repeat. the only problem i will have at the moment is that i have to push the pump arm forward after i pump it backward, but i am going to come up with a way for a spring to push the pump arm forward again.
Posted 08 October 2008 - 08:29 PM
Posted 08 October 2008 - 09:16 PM
Lead Guitar - Swisgar Swikisfsh taller than a tree Bass Guitar - William Murderface Murderface Murderface
Drums - Pickles the Drummer Doodley doo doodley doo ding dong doodley doo
WTB - cheap carbon fiber tank (doesn't need to be in hydro) 4500 is a plus send me a message.
Posted 16 October 2008 - 08:43 AM
is that a true pump or just a pump where you cycle the bolt to chamber a ball.
and im looking for a bolt that has the same threads as the lpr and i will make the pump arm atach to that, just lowes or home depot dosnt have anything, im going to try napa.
Posted 17 October 2008 - 08:48 PM
If you ball with an ][nvert put this in your sig
TechPB.Com Is My New PaintBall Home. If Its Your New PaintBall Home Put This In Your Sig.
Posted 04 November 2008 - 10:56 PM
You can put a spirng over the barrel back. from where the threeads screw in the the foam of your pump handle.aslo try Phantom pump handles and see if they fit your barel. You can try and make the bre of the Phantom bigger if you need to/want to.