Posted 17 November 2012 - 12:06 AM
This post has been edited by andrewthewookie: 17 November 2012 - 12:06 AM
Hybrid SFT • 09 Impulse • HB REV-i • Macroless Mech Ion
Rotor • Grillz • PE 70/45 • Feedback - 21/0/0
Fear is the mind-killer
Posted 17 November 2012 - 12:08 AM
Yes you have a bouncy trigger.
Make sure you have a good spring tension and back out the trigger so it is not a hair pull. Adjust it so it is farther away from the switch and adjust the set screw all the way on the bottom of the trigger out so you have a longer trigger pull.