[SCHULER]

I have a 06 ego. The air elbow in the back of the gun, broke off and I'm wondering how to get it out. Also I'm wondering where to find the part. I also don't know how to post pic and I'm unsure how to post pics it someone can help me out?

[XxJellyFilledxX]

Can you post a link of said "air elbow"

this? http://warpedsportz..../RedQev_2_L.jpg

http://www.ccpaintba...f2351e7f8_m.JPG

[No Mercy Ever]

1) Take a picture or two of the "air elbow".
2) Go to something like Photobucket.com or Imageshack.com
3) Create account at either of them, and upload your picture to the site, known as a photo hosting site
4) Trial and error the codes of the picture(s) here, and post the picture(s)
5) We will have a better idea of what you are talking about, and be able to help you better.

[gndmepyon]

It's called a QEV. You can purchase a new one at Here.

[SCHULER]

XxJellyFilledxX, on 22 May 2012 - 08:33 AM, said:

Can you post a link of said "air elbow"

this? http://warpedsportz..../RedQev_2_L.jpg

gndmepyon, on 26 July 2012 - 08:22 PM, said:

It's called a QEV. You can purchase a new one at Here.

jelly filled: the first one

gndmepyon: yes and thank you for the right spelling

[SCHULER]

Also with that being said, the trigger spring was removed and i not sure if i shouldnt just replace the spring or just buy a complete new trigger? what do you yall think

[cybermaniac15]

If you don't like the trigger, but a new trigger. If you like the trigger, just get a spring..

[SCHULER]

i like the trigger. the problem is i dont know where to get the spring. also spring over magnetic or vice versa? i found the spring!!! now does any one have a idea on how to remove the broke off piece of the qev thats still in the gun?

This post has been edited by SCHULER: 28 December 2012 - 06:44 AM

[WiscoBaller]

easy out

[SCHULER]

WiscoBaller, on 28 December 2012 - 09:51 AM, said:

easy out

ive never used that before.. i was thinking of hitting it with a drill bit, then tapping it with a screw driver and unscrewing it

[SOUP]

Find an old ink pen, take spring out, cut it. stretch it, do what you gotta do to make it work. Profit.

[SCHULER]

SOUP, on 28 December 2012 - 11:20 PM, said:

Find an old ink pen, take spring out, cut it. stretch it, do what you gotta do to make it work. Profit.

yes for the trigger.. i done that already.. im talking about the qev

[WiscoBaller]

Self tapping screw in, then pull it out

[SCHULER]

that doesnt make since? the piece that im trying to get out is screwed in!!!

[WiscoBaller]

Then self tapping screw in, red loctite, and unscrew it

[SCHULER]

oh ok no worrys i sold the gun yesterday