TechPB
Help
I've had my axe for couple months now i have the oled board installed next upgrade is the virtue laser eyes and new bolt. I've seen people with the nano feedneck on the axe but no instructions on how to install it. If anyone knows how i would appreciate the instruction to do it. Don't want to mess her up.
Thanks in advance
Soul
Page 1 of 1
Axe feedneck
#1
X Soul Reaper 
- Newbie
-
- Group: Members
- Posts: 16
- Joined: 07-June 11
- Gender:Male
- Location:New York
Posted 07 July 2011 - 11:10 AM
#2
MURPHofPBP
- Sophomore Member
-
- Group: Members
- Posts: 561
- Joined: 14-February 11
Posted 12 July 2011 - 01:52 AM
take the lever and bolt off the feedneck. put a fitting piece of pvc that fits snug in the feedneck. wrap the feedneck in a cloth (something durrable preferably) to save the annodizing. now grip firmly with plyers and carefully turn counterclockwise until it screws out
This post has been edited by MURPHofPBP: 12 July 2011 - 04:12 PM
POOPIE DOOPIE DOOPIE DOO
#3
Algae
- megasuperawesomelazerbeam railgunofepicdoomandstuff
-
- Group: Members
- Posts: 3,621
- Joined: 06-July 09
- Gender:Male
- Location:New Jersey
Posted 19 July 2011 - 11:03 PM
Algae's FeedbackEmpire Axe Overview
First post? Awesome, but if the OP is asking a question, that's just being an ass
First post? Awesome, but if the OP is asking a question, that's just being an ass
#4
drwoolynipplez
- Sophomore Member
-
- Group: Members
- Posts: 464
- Joined: 30-June 11
- Gender:Male
- Location:Hampshire IL
Posted 11 August 2011 - 07:11 PM
i loveeee you ^^
i loveeee you ^^
i loveeee you ^^
setup: empire axe, 68/45 dxs, pinokio
Feedback +6/0/-0
Feedback +6/0/-0
#5
Jozeph
- Newbie
-
- Group: Members
- Posts: 20
- Joined: 02-July 11
- Gender:Male
Posted 15 October 2011 - 04:44 AM
Wish mine came off that easy, I swear it was the only thing that was tight when I bought the gun. Destroyed the stock feedneck taking it off.
R.I.P Borg
"We who dawn the Pants were born of greatness... such is why the pants have been given! We accept these Pants with pride, and we wear them so!"
www.cannibalcupcakes.com
http://www.facebook....pcakesPaintball
"We who dawn the Pants were born of greatness... such is why the pants have been given! We accept these Pants with pride, and we wear them so!"
www.cannibalcupcakes.com
http://www.facebook....pcakesPaintball
#6
Cromer611
- Member
-
- Group: Members
- Posts: 57
- Joined: 27-July 11
- Gender:Male
- Location:Denver Colorado
Posted 17 May 2012 - 02:44 AM
Lol, take out your bolt guide, take out the two detents, Take off the clamp/bolt/brass thread bearing.
Grab your lighter and a Allen key that will fit through the holes in the clamping feed neck. Warm up the feed neck where it meets the body with your lighter. Waving it on either side of the feed neck. You will see the lock tight begin to weap out of the seem. Now is the time to loosen with your Allen key as a lever.
Some heat on lock tight does amazing things, almost like it was designed that way /facepalm.
Grab your lighter and a Allen key that will fit through the holes in the clamping feed neck. Warm up the feed neck where it meets the body with your lighter. Waving it on either side of the feed neck. You will see the lock tight begin to weap out of the seem. Now is the time to loosen with your Allen key as a lever.
Some heat on lock tight does amazing things, almost like it was designed that way /facepalm.
Share this topic:
Page 1 of 1