[PaintballPassion]

Which marker is better and why?
Maintenance-
Durability-
User friendly-
so on

[Panda's Revenge]

Out of the two definitely go G1.

Maintenance: G1 only needs a little lube now and then after removing the bolt. Spyders tend to break down and no BOB for the Spyder MRX means it's shite.
Durability: GOG G1, no question.
User Friendly: The MRX has proprietary magazines, but has the choice to have an OFFSET feedneck. Bad for snap shooting. the G1 has a center feed, which is better because it's straight down into the breech instead of at an angle so less ball breaks.


Just save yourself a lot of pain and get G1

[kingJurzy]

G-1


The spyder sucks eggs.

[PaintballPassion]

alright thanks for the feedback

Panda, on 13 February 2013 - 07:49 PM, said:

Out of the two definitely go G1.

Maintenance: G1 only needs a little lube now and then after removing the bolt. Spyders tend to break down and no BOB for the Spyder MRX means it's shite.
Durability: GOG G1, no question.
User Friendly: The MRX has proprietary magazines, but has the choice to have an OFFSET feedneck. Bad for snap shooting. the G1 has a center feed, which is better because it's straight down into the breech instead of at an angle so less ball breaks.


Just save yourself a lot of pain and get G1

how much experience do u have with the G1?

[kingJurzy]

PaintballPassion, on 13 February 2013 - 07:53 PM, said:

how much experience do u have with the G1?

To be honest it is not really a competition. I have no experience with it, I don't know about panda, but like I stated before all Spyders suck.

[Panda's Revenge]

Little to no experience, but listen to KingJurzy. Spyders suck shit from the asshole of a rabid dog in Vietnam.

[TJO]

Have any of you tried the Mrx? I haven't either but if I was getting one I would get the spyder just because it's a cheap first strike gun.

[Panda's Revenge]

The Spyder Hammer 7 seems like a much better deal than those other spyder milsim markers.
If anything I would recommend that if you wanted FS capability or mag fed, but for regular woodsball play then no.

[Pakistani]

i have a g-1. the price/performance ratio is awesome.

[PaintballPassion]

well thanks everyone for the feedback once again and these reponses seal the deal for the G-1 thanks a lot

But if anyone has more information they'd like to share about either marker please feel free to leave a reply. Maybe someone else out there had the same problem as me

This post has been edited by PaintballPassion: 13 February 2013 - 08:45 PM

[paintballguy2255]

Or you could save some money and get the SP-1 for $125 versus the G-1 for $250
http://www.ansgear.c...allgunblack.htm

[PaintballPassion]

paintballguy2255, on 13 February 2013 - 08:44 PM, said:

Or you could save some money and get the SP-1 for $125 versus the G-1 for $250
http://www.ansgear.c...allgunblack.htm

Money isn't really an issue but what advantages does the SP-1 have over the G-1?

[junits15]

PaintballPassion, on 13 February 2013 - 08:52 PM, said:

paintballguy2255, on 13 February 2013 - 08:44 PM, said:

Or you could save some money and get the SP-1 for $125 versus the G-1 for $250
http://www.ansgear.c...allgunblack.htm

Money isn't really an issue but what advantages does the SP-1 have over the G-1?

its the same gun, just cheaper

[PaintballPassion]

well I'd rather just get a g-1 because it must be 250$ instead of 125$ for a reason

[Pakistani]

paintballguy2255, on 13 February 2013 - 08:44 PM, said:

Or you could save some money and get the SP-1 for $125 versus the G-1 for $250
http://www.ansgear.c...allgunblack.htm

id still go for the g-1. you get extra parts, a stock, longer barrel, and a blackheart ready breach.
save up a little extra and go for the Blackheart G-1. its awesome.

[PaintballPassion]

As of now I am. But are there any problems marker owners of the g-1 have run into? So I know what to do and what nlt to do to prevent problems

[Panda's Revenge]

Doubt there should be any problems, just make sure to lube it every couple cases.

[ScaryfatkidGT]

The only thing is that the G-1 comes with a case, the reason that the SP-1 is cheaper is because Smart Parts went under and there old so the battery will probably be dead and it only has a 10" barrel.

$125+$2 battey and $30cp barrel=$157 still cheaper

PaintballPassion, on 13 February 2013 - 09:07 PM, said:

well I'd rather just get a g-1 because it must be 250$ instead of 125$ for a reason

This kind of thinking will lose you a lot of money in life

[PaintballPassion]

I'm saying that in this case its 250$ for a reason because I know smart parts is out of business so whatever they made is little old and didn't sell for a reason. So the GoG g-1 is an updated version and I wouldn't have buy other barrels and extensions.

[tot810]

Smart parts and gog are the same company the only differences are the breech of the g1 is already milled for the blackheart and it has a longer barrel. I am going for the sp1. You can still buy a blackheart for it but it comes with a breech and is $100 instead of $65