Alright, the gun has been cleaned, and inspected everything looks in order besides what I previously told you. The pics are being uploaded and will probably be uploaded by the time you read this. Once the detents come in I will go and shoot the gun to make sure its in working order (if you would like I will record it). The seals are to be purchased here
(unless you find another area in the states, here in canada not many stores or sites sell in stock angel parts), using the website you are also able to purchase upgrades which will drastically improve your angel. I.E Magno valve, or Booster Bolt 2. Or you could keep it stock. I upgraded the software on the board to the latest and greatest Fly 2.7, and will include a tube of superglue for when you receive the seals to super glue them on (They will have adhesive already on them however you must take it off using nail polish remover or rubbing alcohol as well as doing the same to the machined breech) this is to ensure no bolt stick issues occur to your angel. **DEEP BREATH** REMEMBER NOT TO PUT ANY LUBE/GREESE/OIL ON THE BOLT!!! It is self lubricating and putting any lubricant on it will cause bolt stick. Service by putting 3 drops of gun oil into your asa, airing it up shooting like 8-9 times, taking the bolt out and wiping it. Thats it! Any questions feel free to ask.