[Rollieelmo]

Is the G1 a cozmetically improved SP1, a performence improved SP1, or an overall improved SP1. Is Mike going to review the G1 and eNVy?

[IhasAcellular]

I believe it comes with the blackheart board, and breach stock....so I'd say its a performance improved sp1

[{Pb}Atracin]

I think the G1 is an improved SP1. You have the ability to choose what feedneck style you want, comes with a stock in box and a longer barrel (with the SP1, you had another version called the Tactical Edition), but you get all of these options in box.

The G1 doesnt come with an Blackheart board (if I'm not mistaken):

Quote

Features

* 11 bps ( upgradable to 25+ with QEV and Board )

Thats quoted from ansgear.

This post has been edited by {Pb}Atracin: 02 February 2011 - 11:38 PM

[Rollieelmo]

So you would have to buy a new board? Then why is the gun priced at 250 when the SP1 was 170?

[Zombie Afroshot]

It has a new reg, new breech, stock, longer barrel..

[ThunderLights]

omfg guys... the G1 comes with a stainless steal screw kit, different reg cover, 14'' barrel, hard case, stock, no wedge and select feed. now decide for yourself if thats worth it.

all of them are useless upgrades except for the 14'' barrel and screw kit IMO and the hard case

This post has been edited by ThunderLights: 03 February 2011 - 07:01 AM

[GoldenElite0]

The stainless steel screws are the best edition to the G1, any SP1 owner will tell you this.

This post has been edited by GoldenElite0: 03 February 2011 - 08:04 AM

[brycelarson]

Rollieelmo, on 02 February 2011 - 11:32 PM, said:

Is the G1 a cozmetically improved SP1, a performence improved SP1, or an overall improved SP1. Is Mike going to review the G1 and eNVy?

cosmetics have changed a touch - nothing significant.
performance? nope, semi only board stock. It does have the eye channels milled in the body - but until we know how much the new board and eyes cost we don't know if this is an improvement.

so, not improved - just re-released.

[Hebiki]

brycelarson, on 03 February 2011 - 08:06 AM, said:

Rollieelmo, on 02 February 2011 - 11:32 PM, said:

Is the G1 a cozmetically improved SP1, a performence improved SP1, or an overall improved SP1. Is Mike going to review the G1 and eNVy?

cosmetics have changed a touch - nothing significant.
performance? nope, semi only board stock. It does have the eye channels milled in the body - but until we know how much the new board and eyes cost we don't know if this is an improvement.

so, not improved - just re-released.

any ideas on when the new board/eyes will be released?

[IhasAcellular]

brycelarson, on 03 February 2011 - 08:06 AM, said:

Rollieelmo, on 02 February 2011 - 11:32 PM, said:

Is the G1 a cozmetically improved SP1, a performence improved SP1, or an overall improved SP1. Is Mike going to review the G1 and eNVy?

cosmetics have changed a touch - nothing significant.
performance? nope, semi only board stock. It does have the eye channels milled in the body - but until we know how much the new board and eyes cost we don't know if this is an improvement.

so, not improved - just re-released.

Maby thats what I got confused with. My apologies sirs!

Quote

Available in UK - semi auto or US field adjustable - semi auto, fully auto and 3 shot burst also PSP & BillyBall modes as standard !!

It appears that its not a semi only board btw.

This post has been edited by IhasAcellular: 03 February 2011 - 01:36 PM

[Crashkt90]

I wouldnt mind getting a vibe..

[PaintballWill]

is there a way to get the right or left feedneck to be vertical?

[Weigel21]

PaintballWill, on 03 February 2011 - 01:43 PM, said:

is there a way to get the right or left feedneck to be vertical?

Yes, it's able to be any of the three. There's a 45* hopper adapter included in case you choose not to run with a center feed setup.

[xero]

Ok, never owned an sp1, but wanted one for a long, long time.

Was ready to get an sp1, then saw the g1. After handling it, I decided on it, and purchased today. number 00163 to be exact.

Difference, as far as I know, from the sp1 to the g1, are:

longer barrel: 14 inch vs whatever it came with before.

Adjustable feed neck: either right, left, or center feed. Also comes with elbow adaptor.
-it is also important to note that the left/right feed as well as the center feed, are made of plastic painted to look like the metal of the marker.

no battery wiggle

Both a stock and a standard backplate
-Important to note that the gun WILL NOT fit into the box with the stock attached. Even with the buttplate of the stock removed, it will not fit, even if you mod the foam inside.

The manual is now on CD-rom instead of a paper manual.

It says G! on the side, I imagine where it used to say SP1

To remove the stock, you must remove the stock plate adaptor. You have to do this every time you put it into the case. Pain in the ass.

It comes with a Smart Parts Barrel Sock.

The case is of high quality. Very high quality. High impact plastic, with a very dense foam inside. With the box my g3 came in, I can push my finger hard enough into it to feel the box on the bottom. Not happening with this foam.

The board, from what my pro-shop says, is coming extremly soon. He says that he is hoping to have it on Monday, and if not then, it will be coming in the next "couple of weeks".

The price for the board is 69.99.

And lastly:
The battery does not rattle.


Overall, I am pleased with my purchase. I didn't think to bring my tank, so have not put paint downrange. Full review w/ unboxing coming in the next few days!

[Weigel21]

xero, on 04 February 2011 - 10:52 PM, said:

Ok, never owned an sp1, but wanted one for a long, long time.

Was ready to get an sp1, then saw the g1. After handling it, I decided on it, and purchased today. number 00163 to be exact.

Difference, as far as I know, from the sp1 to the g1, are:

longer barrel: 14 inch vs whatever it came with before.

Adjustable feed neck: either right, left, or center feed. Also comes with elbow adaptor.
-it is also important to note that the left/right feed as well as the center feed, are made of plastic painted to look like the metal of the marker.

no battery wiggle

Both a stock and a standard backplate
-Important to note that the gun WILL NOT fit into the box with the stock attached. Even with the buttplate of the stock removed, it will not fit, even if you mod the foam inside.

The manual is now on CD-rom instead of a paper manual.

It says G! on the side, I imagine where it used to say SP1

To remove the stock, you must remove the stock plate adaptor. You have to do this every time you put it into the case. Pain in the ass.

It comes with a Smart Parts Barrel Sock.

The case is of high quality. Very high quality. High impact plastic, with a very dense foam inside. With the box my g3 came in, I can push my finger hard enough into it to feel the box on the bottom. Not happening with this foam.

The board, from what my pro-shop says, is coming extremly soon. He says that he is hoping to have it on Monday, and if not then, it will be coming in the next "couple of weeks".

The price for the board is 69.99.

And lastly:
The battery does not rattle.


Overall, I am pleased with my purchase. I didn't think to bring my tank, so have not put paint downrange. Full review w/ unboxing coming in the next few days!

I see it online for $64.95 on Actionvillage and firstcall paintball. However, AV looks to be a preorder.

[cavemag]

From what i've seen GoG has learned from their Smart Parts days mistakes and are starting to put more fit and finish into their markers.