I must say I was very suprised by the results basically in a nut shell the techt upgrades definetly make a huge difference. About a 50 psi difference. The slots allowed the feedrod to work at a lower pressure, the techt tube worked as low as 310 psi But the factory tube wasnt able to go below 360. The Techt tube worked 100% of the time at 338 psi. The factory tube needed to be at more than 420 psi and thats with the techt internals. The factory Tube and internals needed to be atleast above 450 psi.
Unforunatly my pressure gauge only went up to 450 psi I'm going to get another gauge so i can get higher psi readings so i can test the techt tube w/ all factory internals.
If i missed anything or if i did anything wrong let me know and i'll correct redo the test again
Number of downloads: 14