[Chase313]

I want to build a pump, a sniper. Im looking to buy a Lightning autococker but I dont know where to buy one. Other body suggestions are welcome as long as theyre relatively inexpensive and readily available

[TacticlTwinkie]

A good place is on the BST's here and on pbnation and mcb. You can find cockers for under $150 and you can slap a pump kit of your choice on it.

[Chase313]

Thanks man

[andrewthewookie]

Check out the customcockers forum. They've always got a nice selection dedicated to cockers and parts.

[fatalreaction]

or just buy one instead of ruining a perfectly good cocker.... you can buy cocker pumps from paintball gateway for like 180, and i believe they already have check-it valves installed

[Rotozip2]

Or just get something else for a better deal, check-it valves don't offer that much performance over the stock valves IMO.

And putting a pump on a cocker does not ruin it, you can take the front end off and put a pump kit on it 500 times a day, and at the end it will still be an autococker.

[TechPB-Mike]

ebay can also have some amazing guns, but usually the price is pretty high

customcockers is an amazing site too

Just gotta pick a budget, and go shopping. MCB has some nice cockers of course, some do end up here, but I'd check customcockers

amazing shit to buy over there

[TechPB-Mike]

speaking of which, look at this beauty sitting in the BST at custom cockers-



damn....

[TacticlTwinkie]

TechPB-Mike, on 24 January 2013 - 12:32 PM, said:

speaking of which, look at this beauty sitting in the BST at custom cockers-

Spoiler

damn....

I want. Like now.

[BraiNfreeZe]

TechPB-Mike, on 24 January 2013 - 12:30 PM, said:

ebay can also have some amazing guns, but usually the price is pretty high

customcockers is an amazing site too

Just gotta pick a budget, and go shopping. MCB has some nice cockers of course, some do end up here, but I'd check customcockers

amazing shit to buy over there

I agree with Mike, ebay has great deals. Just know what you're looking at before you pull the trigger....

[Chase313]

... Mike Philips commented on my thread, thats awesome. And thanks, I'll be sure to check those sites thanks guys

[Klub]

fatalreaction, on 22 January 2013 - 02:08 AM, said:

or just buy one instead of ruining a perfectly good cocker.... you can buy cocker pumps from paintball gateway for like 180, and i believe they already have check-it valves installed

Pumping doesn't ruin a cocker, you can easily switch a sniper back to a cocker. The pumps on paintball gateway are a ripoff.

Look used on the forums, or ebay. Best place to find a nice, reasonably priced cocker.

[fatalreaction]

Klub, on 25 January 2013 - 07:25 PM, said:

fatalreaction, on 22 January 2013 - 02:08 AM, said:

or just buy one instead of ruining a perfectly good cocker.... you can buy cocker pumps from paintball gateway for like 180, and i believe they already have check-it valves installed

Pumping doesn't ruin a cocker, you can easily switch a sniper back to a cocker. The pumps on paintball gateway are a ripoff.

Look used on the forums, or ebay. Best place to find a nice, reasonably priced cocker.

ok "ruin" isn't necessarily the right word, but would somebody say something if you pumped a DC1 or 2? What about a belsales evo x? My point is why pump something hard to find or something that has nice lines? i mean by all means pump a prostock or nightkast...

[bassfisher]

A pumped DC2 would be amazing

[Antonious]

fatalreaction, on 26 January 2013 - 10:38 AM, said:

My point is why pump something hard to find or something that has nice lines? i mean by all means pump a prostock or nightkast...

So pumps can't have nice lines too? They can only be the boring old bodies that nobody cares about?

bassfisher, on 26 January 2013 - 09:44 PM, said:

A pumped DC2 would be amazing

I still dream of somehow getting a hold of OEFVeteran's DC2 and pumping it.

This post has been edited by Antonious: 26 January 2013 - 11:31 PM

[tallsmallboy44]

bassfisher, on 26 January 2013 - 09:44 PM, said:

A pumped DC2 would be amazing

OEF would probably kill you if you pumped a DC2.

[bassfisher]

Pneumatics can be swapped out and put back on. The dc2 is also my favorite marker of all time if it damaged it in any way, I too would cry.

[fatalreaction]

Antonious, on 26 January 2013 - 11:29 PM, said:

fatalreaction, on 26 January 2013 - 10:38 AM, said:

My point is why pump something hard to find or something that has nice lines? i mean by all means pump a prostock or nightkast...

So pumps can't have nice lines too? They can only be the boring old bodies that nobody cares about?

Yea basically.. the only good looking pump i've ever seen was a Dye Reflex...

i'm fully aware that pnues can be swapped on and off, i'm not a noob or idiot

[cocker addict]

Pump doesn't ruin cockers in my mind because it can always be swapped back again, but do you know what does? Eblades
When people drill beautiful autocockers to except an eblade it destroys that cocker forever. The only exception is a bind eblade with no eye holes.

[kingJurzy]

cocker addict, on 27 January 2013 - 12:54 PM, said:

Pump doesn't ruin cockers, but do you know what does? Eblades

I do have to agree with you. The Eblade sensor is shit.

This post has been edited by kingJurzy: 27 January 2013 - 01:01 PM