[ZERO*EGO]

well finally got the chance to become part of the Mag fam. picked up this RT for cheap. works just fine seems easy to breakdown/maintain. question for you guys though. is the "foregrip" just a gas-thru or is it a true regulator of some sort? if its just a gas-thru can i simply run my macro from the asa to the back/side of the gun. obviously have plenty to learn. my biggest problem is not knowing what the differences are between say the RT, RT Pro, RT ULE, etc. so its hard to know what i can and cant do with this marker. any and all help is appreciated... on to a couple of pics.

[Chace365]

Gas through. And sexy RT.

[jdlarson11]

Remember, the tank output pressure will dictate how reactive your trigger is.

[Chace365]

Wait. I think you're missing a feed plug. You might wanna pick one up from Roman at AGD.

[Seymour]

Yea your missing a feed plug. Also, 850 PSI at minimum for your input. Dont put a reg on the gun. The back half of the valve is a regulator so putting two regs on the gun will strangle it. Mags love high pressure, so the higher the pressure the more reactive. But above say 900 PSI Id use Steel braided line because I wouldnt want a macro line blowing in my face at 900+ PSI.

[Eskimo]

I run macro on my mag, but the steel seems to complete the look for the marker.

You may run the hose in a "C" shape from the ASA to the Valve directly.
I'd suggest callin AGD ( number right in the main website)
Highlight below for SUPER NINJA text.
I screwed somthing up. lol. sorry.
Airgun Designs USA
Airgun Designs USA
401 Florine Court, Cary, IL 60013
Hours: Monday to Thursday 10:00 a.m. - 5:00 p.m. (Central Time)
Office Tel: 847-520-7507 • Fax: 847-548-2149
Tech Support Hours: Monday to Thursday 10:00 am to 5:00 pm (Central Time)
Tech Support Tel: 847-520-7225 • Tech Support Email: romanr@airgun.com401 Florine Court, Cary, IL 60013
Hours: Monday to Thursday 10:00 a.m. - 5:00 p.m. (Central Time)

[ZERO*EGO]

thanks for the help. i have the feed plug, just wasnt in for the pic. besides the barrel and asa it seems to be all stock. it came with the ANS bolt but from what i've read that isn't much of an upgrade, so i took it out n put the stock one in. what upgrades would you guys suggest?

[Seymour]

Intelliframe.

[ZERO*EGO]

i was hoping i could get a longer trigger/frame and some upgrade to lighten the trigger pull so i could walk it a bit. the gun has a very "snappy" shot to it. u can feel she wants to rip.lol

[jdlarson11]

The only way to really make it rip it to increase the output pressure of the tank.

more pressure = faster

What tank do you have?

[brycelarson]

There's a good side and a bad side to those RTs. The good side is that you can't really upgrade them. That will save you hundreds of dollars. The bad side - you can't really upgrade them.

As for walking - that's not really going to happen unless you do some sort of pneu converstion. The way to make an RT go really, really fast is to crank your input pressure then you can sweetspot the trigger and make it go into really fast full auto. The snappyness you feel is the RT (reactive trigger). It's designed to pop the trigger back very quickly.

I'll double the info - but that's a gas through grip. the gas actually goes through the rail on those (that's the chunk between the body and the grip frame) - so you can hook things up all over the place on all those plugs. There's a picture somewhere of CockerPunk's RT with about 12 feet of macro looping all over the place.

Grip frames are pretty much the only thing I would consider changing on that gun - it's nice.

[Eskimo]

Well if you are looking for upgrades there are a few, but as far as perfromance goes, your in good standing.
If you feel the need to drop cash into your jem there, you could look into:

Grip-Frame. - The intelliframe can be purchused right from the AGD website with eather the "blade" or the "double" triggers. This will of course give you room for two fingers in there rather then one.

Mainbody - If you wanted you could grab a ULE body, the only problem is that im not sure you have a Autococker threaded barrel laying around, the only two reasons to go to this body style would be to reduce weight and for a Centerfeed body perhaps. ( in terms of performance )

If you want, search up the "Dealers" section of the "automags Online" forums, sometimes people will be getting lists going for eather new frames, triggers, body styles ect ect. They may cost a bit more but if you want the "scythe" trigger to rip on the pneumatic frame. yes you can do that. granted you should make sure thier designs are compatable with your valve/rail ect ect.

I say enjoy what you have.
If you have any further questions feel free to ask.

[brycelarson]

This is a nice looking mag - my suggestion would be that if you want a project gun - pick up another cheap mag to play with. Other than the frame this one looks very happy to me.

[Eskimo]

I too agree.
Although if you end up picking another mag you wont stop and your going to end up a gigantic automag hoe.
( which isnt a bad thing, but your bank account will HATE you. and dont expect to hold onto a girlfriend. unless she's a automaggot. then marry her right now.)

[jdlarson11]

is this level 10'd?

[Eskimo]

AHH. I cant beleive I didnt even think of that!


If you want a AWESOME upgrade ( unless you already have it)
Which deals no visual difference but opens the entire world up to you.
Level 10

This is the god send of AGD technology ( I will place the Level 10 above the E-mag. or even the X-valve, but only by a small degree)

when you are at level 7, and you create a anti-chop system which is so good. So amazing, that you skip levels 8 and 9 completely.
Thats how good level 10 is.

Good call sir.

http://www.youtube.c...h?v=Mfznk4Sshcs

This post has been edited by Eskimo: 30 July 2010 - 03:16 PM

[brycelarson]

jdlarson11, on 30 July 2010 - 03:07 PM, said:

is this level 10'd?

durr, yeah, there's a must have accessory for a mag. funny no one said anything until this.

[jdlarson11]

RT w/ No lvl 10 = Blender

[ZERO*EGO]

right now i have a dxs tank 850psi output i believe. are there any tank regs that do 1000 or higher? definitely have to look into the lvl 10 bolt. and are the ULE mainbodies compatible with these RT's? what i like most about this gun so far is that the grip sits perfect in my hand. even though its a bit heavier than my G3 it seems like a better fit when holding it. best part of a mech. frame i suppose, not jam packed with electronics that force the fatter frames.

This post has been edited by ZERO*EGO: 31 July 2010 - 02:16 AM

[jdlarson11]

Add a shim to a ninja tank to hit 1000