[georgek]

thank you very very much for the quick reply!!
the threads of both bottle an reg are fine, it is the oring that seems to be too big on that bottle.. with the 110 it completely screws in.
i will now try out a 015 oring right now

[georgek]

ok... the 015 UR90 is very thin, i will keep the 110 which seems to fit better..

[ninjapaintball]

georgek, on 07 December 2011 - 01:04 PM, said:

ok... the 015 UR90 is very thin, i will keep the 110 which seems to fit better..

each bottle will have an o-ring size and what i have listed is what is most common. I do not know what the new safer o-ring size should be but i know they machined it to a set size- contact them for an exact match.

[georgek]

yes i know this that is why i am asking.. from all 112 , 111, 015 and 110, the best fit is with the 110..
the 112 and 111 get pinched between the reg body an the tank neck.
i will test it this weekend. if you ever get your hand on one of this tanks can you check it please.
thank you very very much for the help..
I have already loved your regulator and i haven't used it yet!!!!
It seems super quality!!!!!
Thanks again!!!

[ninjapaintball]

georgek, on 07 December 2011 - 01:51 PM, said:

yes i know this that is why i am asking.. from all 112 , 111, 015 and 110, the best fit is with the 110..
the 112 and 111 get pinched between the reg body an the tank neck.
i will test it this weekend. if you ever get your hand on one of this tanks can you check it please.
thank you very very much for the help..
I have already loved your regulator and i haven't used it yet!!!!
It seems super quality!!!!!
Thanks again!!!

good luck and remember there should be NO gap - hold it up to a light and you should not see anything between the reg and bottle - if you do then the air will push the o-ring out and pop!

[sticktodrum]

I'm convinced. Ray is the greatest entity in paintball.

[ninjapaintball]

sticktodrum, on 07 December 2011 - 03:21 PM, said:

I'm convinced. Ray is the greatest entity in paintball.

thank you but please stop stalking me!

joking and love you too!

[TK-421]

ninjapaintball, on 07 December 2011 - 03:29 PM, said:

sticktodrum, on 07 December 2011 - 03:21 PM, said:

I'm convinced. Ray is the greatest entity in paintball.

thank you but please stop stalking me!

joking and love you too!

Yeah, stop stalking him, that's my job.

On another note, I got a 90/45 in a trade, but the reg isn't loctited on, and whenever I screw the bottle into my ASA, I have to unscrew the bottle so I can grab the reg to get enough leverage to unscrew the reg. What would it cost to get it loctited in place? And is it possible my ASA is messed up? Or does the threading on the bottle just make it easier to unscrew the bottle than the reg, when it's not loctited on?

[ninjapaintball]

another stalker!!!!

where are you at now, IL or TX? if IL com eon by and i will get it on. If TX the pm me and i will get you an ra# - have to pay shipping both ways

sounds like the threads on the ASA may not be correct - lube those threads next time and see if that helps

[TK-421]

I'm in TX for the forseeable future, so I'll PM you for an RA number and get it shipped out with my next paycheck. And I'll try a few different ASA's and see if that helps the problem. Just make sure to double check the threads on the reg to make sure I haven't screwed them up somehow.

[ninjapaintball]

not a problem and whenever i get the PM i will get you the ra#

[H2Oman251083]

Ray,
is there a plan to make more of the 49ci tanks? The 50s are too short and the 45s are too long...

Thanks!

[ninjapaintball]

H2Oman251083, on 19 December 2011 - 06:31 PM, said:

Ray,
is there a plan to make more of the 49ci tanks? The 50s are too short and the 45s are too long...

Thanks!

Not at this time but check your local dealer or many internet stores may have some left.

[Cookybiscuit]

Ray, do you know of any retailers in the UK that sell Ninja tanks, or tanks with Ninja regs? Because I've only found one so far and they're out of stock

[ninjapaintball]

Cookybiscuit, on 20 December 2011 - 12:23 PM, said:

Ray, do you know of any retailers in the UK that sell Ninja tanks, or tanks with Ninja regs? Because I've only found one so far and they're out of stock

i can't think of any shops that would have our tanks as they are not PI but are regs are in a lot of shops. Check around but i know the German sites have them

rb trading
maxs
paint xtreme
bz paintball
national paintball fields

[Cookybiscuit]

ninjapaintball, on 20 December 2011 - 12:50 PM, said:

i can't think of any shops that would have our tanks as they are not PI but are regs are in a lot of shops. Check around but i know the German sites have them

rb trading
maxs
paint xtreme
bz paintball
national paintball fields

Thanks. I'd rather not order from outside the UK, so I think I'll have to give BZ a call and find out when they get them back in stock, dosent look like NPF sell Ninja unfortunetly.

Thanks again.

[ninjapaintball]

Cookybiscuit, on 20 December 2011 - 01:17 PM, said:

ninjapaintball, on 20 December 2011 - 12:50 PM, said:

i can't think of any shops that would have our tanks as they are not PI but are regs are in a lot of shops. Check around but i know the German sites have them

rb trading
maxs
paint xtreme
bz paintball
national paintball fields

Thanks. I'd rather not order from outside the UK, so I think I'll have to give BZ a call and find out when they get them back in stock, dosent look like NPF sell Ninja unfortunetly.

Thanks again.

also try
manic
lips
demon

[Cookybiscuit]

ninjapaintball, on 20 December 2011 - 01:40 PM, said:

also try
manic
lips
demon

Lips sell them so I think thats what I'll go for if BZ dont get them in stock any time soon, thanks again.

[ninjapaintball]

Cookybiscuit, on 20 December 2011 - 04:55 PM, said:

ninjapaintball, on 20 December 2011 - 01:40 PM, said:

also try
manic
lips
demon

Lips sell them so I think thats what I'll go for if BZ dont get them in stock any time soon, thanks again.

your welcome

[Hebiki]

Ray,

when screwing in a reg into a tank.... do you just hand tighten? use locktite? wrench tighten? please advise.. i have a tank id like to put a ninja reg on it. thanks in advance

- Chris