[ninjapaintball]

Pm me and we will work something out

[Box]

ninjapaintball, on 04 August 2012 - 05:25 PM, said:

Pm me and we will work something out

(redacted)

edit: oops, meant to pm lol

This post has been edited by Box: 04 August 2012 - 06:42 PM

[ContractKiller]

Could you confirm that I would need the high pressure tank for a pm8? I am 100% sure I am buying ffrom your company. Thank you for the great service and the fact you guys are made in the USA

[TK-421]

Get their regular Ninja Pro Regulator, that will allow you to change your tank from high, to mid, to low pressure as you need it. The recommended pressure for your PM8 is 850psi. So buy a Ninja Pro Regulator, and then you don't need to do anything to it, because it already comes setup to output the 850psi you need.

[ninjapaintball]

ContractKiller, on 05 August 2012 - 02:36 PM, said:

Could you confirm that I would need the high pressure tank for a pm8? I am 100% sure I am buying ffrom your company. Thank you for the great service and the fact you guys are made in the USA

The pmr should work with any setting of a ninja or a ninj pro reg. we recommend the 550 of the pro reg as this will help with the efficiency and the consistency of the gun.

[slinkyaroo]

I absolutely love how you tend to your customers ninja. You go above what is expected.

[ContractKiller]

TK-421, on 05 August 2012 - 02:41 PM, said:

Get their regular Ninja Pro Regulator, that will allow you to change your tank from high, to mid, to low pressure as you need it. The recommended pressure for your PM8 is 850psi. So buy a Ninja Pro Regulator, and then you don't need to do anything to it, because it already comes setup to output the 850psi you need.

Thank You!

ninjapaintball, on 05 August 2012 - 06:40 PM, said:

ContractKiller, on 05 August 2012 - 02:36 PM, said:

Could you confirm that I would need the high pressure tank for a pm8? I am 100% sure I am buying ffrom your company. Thank you for the great service and the fact you guys are made in the USA

The pmr should work with any setting of a ninja or a ninj pro reg. we recommend the 550 of the pro reg as this will help with the efficiency and the consistency of the gun.

So you recommend the 550 psi for the pm8 instead of the recomennded 850?

[ContractKiller]

slinkyaroo, on 05 August 2012 - 06:54 PM, said:

I absolutely love how you tend to your customers ninja. You go above what is expected.

I absolutely agree! I will recommend Ninja to anyone in need of a tank/regulator

[ninjapaintball]

ContractKiller, on 05 August 2012 - 11:56 PM, said:

TK-421, on 05 August 2012 - 02:41 PM, said:

Get their regular Ninja Pro Regulator, that will allow you to change your tank from high, to mid, to low pressure as you need it. The recommended pressure for your PM8 is 850psi. So buy a Ninja Pro Regulator, and then you don't need to do anything to it, because it already comes setup to output the 850psi you need.

Thank You!

ninjapaintball, on 05 August 2012 - 06:40 PM, said:

ContractKiller, on 05 August 2012 - 02:36 PM, said:

Could you confirm that I would need the high pressure tank for a pm8? I am 100% sure I am buying ffrom your company. Thank you for the great service and the fact you guys are made in the USA

The pmr should work with any setting of a ninja or a ninj pro reg. we recommend the 550 of the pro reg as this will help with the efficiency and the consistency of the gun.

So you recommend the 550 psi for the pm8 instead of the recomennded 850?

Yes and if you have an issue you can always go back to the 800 psi

[ContractKiller]

Hey Ray,

I just picked up a cheap DXS tank with a ninja reg on it. How much would it be for rehyrdo and install of reg?

Also, thank you for the help

[ninjapaintball]

ContractKiller, on 06 August 2012 - 04:01 PM, said:

Hey Ray,

I just picked up a cheap DXS tank with a ninja reg on it. How much would it be for rehyrdo and install of reg?

Also, thank you for the help

check your local pro shop first!

if not than $40.00 for a hydro and put your reg back in + shipping

[ContractKiller]

I don't have a local proshop within 2 hours otherwise I would

[ninjapaintball]

ContractKiller, on 06 August 2012 - 04:56 PM, said:

I don't have a local proshop within 2 hours otherwise I would

that makes me sad, go to ninjapaintball.com and fill out the form and send it in

[ContractKiller]

ninjapaintball, on 06 August 2012 - 05:24 PM, said:

that makes me sad, go to ninjapaintball.com and fill out the form and send it in

makes me sad too I just called a scuba shot an hour away and they have to send out the tanks so I guess you guys are getting my business How long would it take a field to test a tank if possible?

[ninjapaintball]

Depends but we do all hydros in 3-5 days plus shipping

[ContractKiller]

Alright, thank you

[TK-421]

Just wanted to give you a heads up that I'll need an RMA number when I can figure out how to pay for shipping. Got a nice big crack in the clear coat on my green tank. No idea how it developed, put the tank butt on, set it in my gear bag on top of some fluffy towels, picked it up today to move it to a different area, and there's a very long crack that goes from the neck to the bottom and loops around. Never been moved, dropped, or even touched since I set it on top of the fluffy towels in the top of my gear bag. So once I get the money for shipping I'd like to send it in to get replaced, if you have other green tanks.

[Dragon1291]

If one needs to replace a burst disk, all they need to do is unscrew the old disk, and simply screw on the new one correct? No thread sealers or anything of that sort right? Just want to make sure.

[ninjapaintball]

Dragon1291, on 21 August 2012 - 07:33 PM, said:

If one needs to replace a burst disk, all they need to do is unscrew the old disk, and simply screw on the new one correct? No thread sealers or anything of that sort right? Just want to make sure.

Correct but check out the manual on our website for more info.

Also when the bd blows out it means there is something tat may be wrong with the reg and it should be rebuilt

[Dragon1291]

Thanks. I also have another question if you don't mind.

If say I get an old tank with a Ninja reg, and the tank dies (i.e. 15 years old), is it possible to send the tank in to Ninja, and have the reg transferred to a new tank? If so how much would it be?
JUst curious.