[jeremy]

ninjapaintball, on Feb 3 2009, 08:32 AM, said:

jeremy, on Feb 2 2009, 08:11 PM, said:

Ray,

I was wondering if you could explain to me the differences between the Brass and Aluminum bonnets on the regs?

Thanks

The brass bonnet is more durable and comes on all of our systems. The aluminum bonnets are lighter and darker in color but will wear much faster. We recommend the aluminum bonnet for experienced player only and for use with a ASA with a on/off feature.

As with all bonnets you should lube the threads.

thanks ray

[CRU_Paintball]

I dont' know if Mike was using a ninja tank or not on the efficiency test with the vice but with a 68/4500 tank filled to 4000 psi he did shoot over a case of paint. I was very suprised... but it happenned. Anyway just letting you know. I think its great the response you are giving everyone Ray. This is what sells product...Customer Service!!! I hope everyone else takes note of how much time Ray actually spends on here answering everyone's questions. Thanks a lot Ray!!!!

This post has been edited by CRU_Paintball: 03 February 2009 - 09:58 AM

[jigsaw77]

how often should u lube the threads

[ninjapaintball]

jigsaw77, on Feb 7 2009, 09:26 PM, said:

how often should u lube the threads

ideally before every use but in reality if you lube it once every few times you play this will help.

[jigsaw77]

what lube is recommended

[CPBjunkie]

Question about the Ninja fill whip hose extension; it says that the hose is rated at 4500psi. What kind of hose is it? What is is made out of etc.? Thanks.

[ninjapaintball]

jigsaw77, on Feb 8 2009, 02:04 AM, said:

what lube is recommended

Ninja Paintball recommend Ninja lube for any application on a Ninja reg. Vaseline, Tri-flow, or any other lube that you would use on your marker will work for the bonnet threads if you do not have Ninja lube.

[ninjapaintball]

CPBjunkie, on Feb 8 2009, 06:17 PM, said:

Question about the Ninja fill whip hose extension; it says that the hose is rated at 4500psi. What kind of hose is it? What is is made out of etc.? Thanks.

The hose is a factory rated 4500 psi inner core hose with a thermal coat plastic jacket. Both the male and female qd are rated at 5000 psi WORKING pressure.

[Plague]

Hey Ray,
i was wondering what tank cover you would recommend for the 50,4500 tank? it looks like the CP 48 cover would be a tight fit.
Thanks your a great guy.

[{Pb}Atracin]

Will the tanks be available for purchase via Canadian paintball retailers (like Badlands or CanadianPaintball)?
I'm asking because I don't wan't to pay alot of shipping, pay Customs Tax and the like....

[ninjapaintball]

Plague, on Feb 10 2009, 09:52 PM, said:

Hey Ray,
i was wondering what tank cover you would recommend for the 50,4500 tank? it looks like the CP 48 cover would be a tight fit.
Thanks your a great guy.

We get that question a lot but i do not know as of right now. If you find one please post it on here for everyone.

Everyone at Ninja paintball does not use a tank cover- that is why we do not know what will fit.

Ray

[ninjapaintball]

{Pb}Atracin, on Feb 10 2009, 10:56 PM, said:

Will the tanks be available for purchase via Canadian paintball retailers (like Badlands or CanadianPaintball)?
I'm asking because I don't wan't to pay alot of shipping, pay Customs Tax and the like....

We are working with some Canadian dealers but only one has started to carry our line- paintballgear canada
www.paintballgear.ca i think.

To all the Canadians, we are looking into the NAFTA paperwork as we produce an American made product we were told that there will be little to no tax on our products to ship to Canada. Give us a liitle time and we will find out all the details.

Ray

[CRU_Paintball]

ninjapaintball, on Feb 11 2009, 08:36 AM, said:

Plague, on Feb 10 2009, 09:52 PM, said:

Hey Ray,
i was wondering what tank cover you would recommend for the 50,4500 tank? it looks like the CP 48 cover would be a tight fit.
Thanks your a great guy.

We get that question a lot but i do not know as of right now. If you find one please post it on here for everyone.

Everyone at Ninja paintball does not use a tank cover- that is why we do not know what will fit.

Ray

Considerring that exhault tank cover fit a 45 and a 68 CI Tank, it should fit great. As soon as I buy my ninja I'm buying an exhault tank cover... I let you know how it goes but it should fit awesome. hope this helps

-CRU

[ninjapaintball]

CRU_Paintball, on Feb 11 2009, 08:34 AM, said:

ninjapaintball, on Feb 11 2009, 08:36 AM, said:

Plague, on Feb 10 2009, 09:52 PM, said:

Hey Ray,
i was wondering what tank cover you would recommend for the 50,4500 tank? it looks like the CP 48 cover would be a tight fit.
Thanks your a great guy.

We get that question a lot but i do not know as of right now. If you find one please post it on here for everyone.

Everyone at Ninja paintball does not use a tank cover- that is why we do not know what will fit.

Ray

Considerring that exhault tank cover fit a 45 and a 68 CI Tank, it should fit great. As soon as I buy my ninja I'm buying an exhault tank cover... I let you know how it goes but it should fit awesome. hope this helps

-CRU

At the extravaganza exhault covers were fitted to the ninja tanks. They were tight and took some effort but they will fit.

[CRU_Paintball]

ninjapaintball, on Feb 11 2009, 09:46 AM, said:

CRU_Paintball, on Feb 11 2009, 08:34 AM, said:

ninjapaintball, on Feb 11 2009, 08:36 AM, said:

Plague, on Feb 10 2009, 09:52 PM, said:

Hey Ray,
i was wondering what tank cover you would recommend for the 50,4500 tank? it looks like the CP 48 cover would be a tight fit.
Thanks your a great guy.

We get that question a lot but i do not know as of right now. If you find one please post it on here for everyone.

Everyone at Ninja paintball does not use a tank cover- that is why we do not know what will fit.

Ray

Considerring that exhault tank cover fit a 45 and a 68 CI Tank, it should fit great. As soon as I buy my ninja I'm buying an exhault tank cover... I let you know how it goes but it should fit awesome. hope this helps

-CRU

At the extravaganza exhault covers were fitted to the ninja tanks. They were tight and took some effort but they will fit.

Anything worth doing is going to take some effort right??? J/k glad to see that they fit, they look like a very nice cover but I haven't used them yet to be sure.

[jeremy]

Ray,

I just recieved my tank today and i noticed that there was lube on the top by the pin as well as on the o-ring. Should i wipe it of or leave it as it is?

Thanks

[ninjapaintball]

jeremy, on Feb 11 2009, 01:40 PM, said:

Ray,

I just recieved my tank today and i noticed that there was lube on the top by the pin as well as on the o-ring. Should i wipe it of or leave it as it is?

Thanks

You can leave it there. Ninja paintball lubes the bonnet threads to help prevent wear and problems with the ASA of your gun.

Ray

[jeremy]

ninjapaintball, on Feb 11 2009, 02:51 PM, said:

jeremy, on Feb 11 2009, 01:40 PM, said:

Ray,

I just recieved my tank today and i noticed that there was lube on the top by the pin as well as on the o-ring. Should i wipe it of or leave it as it is?

Thanks

You can leave it there. Ninja paintball lubes the bonnet threads to help prevent wear and problems with the ASA of your gun.

Ray

Thanks Ray

[never2bord0]

i just bought a ninja 50ci and i have noticed like 3 or 4 small circled dents in my tank.. is that ok or if not wat should i do? and i the back of the fill niple there was this goo and i peeled it all off... thats not really a problem is it? just makin sure and does the aluminum bonnet come on the tank already or do u have to install it

This post has been edited by never2bord0: 17 February 2009 - 12:06 AM

[ninjapaintball]

never2bord0, on Feb 16 2009, 10:23 PM, said:

i just bought a ninja 50ci and i have noticed like 3 or 4 small circled dents in my tank.. is that ok or if not wat should i do? and i the back of the fill niple there was this goo and i peeled it all off... thats not really a problem is it? just makin sure and does the aluminum bonnet come on the tank already or do u have to install it

With out a picture it is hard to say about the tank but if you received it like that then it just a cosmetic blem but if you want we will exchange it, Pm me for details.

The goo you removed is the black ninja teflon tape, no problem because most of it should already be in the threads to seal.

the aluminum bonnets comes separate and you have to install it. See the videos on the website for details.

Thank you,

Ray